User manual LABTEC NOTEBOOK OPTICAL MOUSE PRO

[. . . ] Gently pull your hands apart until you reach the desired cord length. Gently pull your hands apart until you feel tension that pulls the cord toward the center. Slowly bring your hands together until the cable is completely wound. [. . . ] If Labtec chooses to repair or replace the hardware, Labtec may use new or refurbished parts, or comparable products. Any replacement hardware will be warranted for the remainder of the original warranty period or thirty (30) days, whichever is longer. These remedies are void if failure of the hardware has resulted from accident, abuse, misapplication, or any unauthorized repair, modification or disassembly. Further, for cordless devices, these remedies are void if you use battery types other than those recommended by Labtec. Upon request from Labtec, you must prove the date of the original purchase of the hardware by a dated bill of sale or dated itemized receipt. Some jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Some jurisdictions do not allow the exclusion or limitation of incidental or Consequential damages, so the above limitation or exclusion may not apply to you. The above limitations will not apply in case of personal injury where and to the extent that applicable law requires such liability. Before submitting a warranty claim, we recommend you visit the support section at www. In order to obtain warranty service, you must contact Labtec or the Labtec dealer where you purchased your product, within the warranty period. During the first two years of a warranty period, warranty claims are generally processed through the point of purchase; however, this policy may vary in some countries, such as in the U. , where warranty claims are processed through the point of purchase during the first year only and, thereafter, you should contact Labtec directly. The addresses and customer service telephone numbers for Labtec can be found in the documentation accompanying your product and on the web at www. Labtec assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice. Labtec, the Labtec logo, and other Labtec marks are owned by Labtec and may be registered. [. . . ] If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) reorient or relocate the receiving antenna; 2) increase the separation between the equipment and the receiver; 3) connect the equipment to an outlet on a circuit different from that to which the receiver is connected; 4) consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Where shielded interface cables have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulations. [. . . ]