User manual LEGO 6584

[. . . ] · For the sake of simplicity, the sample displays in this manual do not show the analog hands of the watch. · Depending on the model of your watch, display text appears either as dark figures on a light background, or light figures on a dark background. All sample displays in this manual are shown using dark figures on a light background. · Each section of this manual provides you with the information you need to perform operations in each mode. [. . . ] · You also can select auto-repeat, which automatically restarts the countdown from the original value you set whenever zero is reached. · All of the operations in this section are performed in the Countdown Timer Mode, which you enter by pressing Seconds C. Hours Minutes To use the countdown timer Press D while in the Countdown Timer Mode to start the countdown timer. · When the end of the countdown is reached and auto-repeat is turned off, the alarm sounds for 10 seconds or until you stop it by pressing any button. The countdown time is reset automatically to its starting value after the alarm stops. · When auto-repeat is turned on, the countdown will restart automatically without pausing when it reaches zero. The alarm sounds when the countdown reaches zero. · The countdown timer measurement operation continues even if you exit the Countdown Timer Mode. · To stop a countdown operation completely, first pause it (by pressing D), and then press A. This returns the countdown time to its starting value. To configure countdown start time and auto-repeat settings 1. While the countdown start time is on the display in the Auto-repeat on indicator Countdown Timer Mode, hold down A until the hour setting of the countdown start time starts to flash, which indicates the setting screen. To toggle a city code time between Standard Time and Daylight Saving Time 1. In the World Time Mode, use D and B to display the DST indicator city code (time zone) whose Standard Time/Daylight Saving Time setting you want to change. Hold down A to toggle Daylight Saving Time (DST indicator displayed) and Standard Time (DST indicator not displayed). · The DST indicator is shown on the World Time Mode screen while Daylight Saving Time is turned on. · Note that changing the Daylight Saving Time for any city code causes the setting to be applied to all city codes. lll llll To turn the auto light switch on and off In the Timekeeping Mode, hold down D for about three seconds to toggle the auto displayed) and off ( not displayed). light switch on ( ) is on the display in all modes while the auto · The auto light switch on indicator ( light switch is turned on. · In order to protect against running down the battery, the auto light switch will turn off automatically about six hours after you turn it on. Repeat the above procedure to turn the auto light switch back on if you want. · Illumination is always disabled (regardless of the current auto light switch setting) while an alarm is sounding. Alarm Off Signal Off Alarm On Signal Off Alarm Off Signal On Alarm On Signal On Reference This section contains more detailed and technical information about watch operation. It also contains important precautions and notes about the various features and functions of this watch. Stopwatch Modes The following describes how to perform data storage and measurement in the stopwatch modes. City code The World Time Mode digitally displays the current time in 50 cities (30 time zones) around the world. · The times kept in the World Time Mode are synchronized with the time being kept in the Timekeeping Mode. [. . . ] · You may notice a very faint clicking sound coming from the watch when it is shaken back and forth. This sound is caused by mechanical operation of the auto light switch, and does not indicate a problem with the watch. To specify the temperature display unit 1. In the Timekeeping Mode, hold down A until the seconds start to flash, which indicates the setting screen. Press C 10 times to display the temperature unit setting screen. [. . . ]