User manual LEICA APO-TELEVID 62

[. . . ] To remove the eyepiece, turn it to the left and then remove it straight. note: Before removing the Zoom eyepiece (Order No. 41 012) by rotating it to the left, its locking slider must first be pulled upwards. Using with and without glasses Users that do not wear glasses should pull out the eyepiece cups with sliding eyepiece sleeve (1) until they engage. [. . . ] 20 Note: All eyepieces are supplied with case, bayonet cover and protective cap. The eyepieces can also be used on Leica Televid 77 models with no impairment of their performance. This results in a 20% higher magnification. Magnification Objective field of view [in m/1000 m] Subjective field of view [in °] Exit pupil diameter Focal length Diameter Length [with eyepiece cup pushed in] Weight Magnification when used on Televid 77 models 16-48 x 41 012 16-48 x 44-24 2, 5-1, 4° 32 x WA 41 007 32 x 40 2, 3° 32 x 41 003 32 x 28 1, 6° 1. Most earlier and current reflex cameras can be connected to one of the LEICA TELEVID 62 models using the photo adapter (order no. 9/800 m telephoto lens, which you can use to photograph the object being viewed quickly and easily. To attach the PHOTO ADAPTER to the Televid, first of all release and remove the eyepiece. Then screw the PHOTO ADAPTER onto the thread on the outside of the bayonet. For Leica R cameras, we recommend using only the LEICA T2 adapter, as adapters from other manufacturers can lead to poor results and even damage for the following reasons: · If the relevant radial cams for LEICAFLEX models are not present, this can result in incorrect exposures. ⷠIncorrect fitting can also cause incorrect exposures and ­ due to there being no locking ­ can lead to the connection coming loose. ⷠIf the aperture lever on the LEICAFLEX SL2 collides with the peripheral cam of the T2 adapter, damage to both the camera and the adapter is possible. Notes: Case, front and back cover are all included. the PHOTO ADAPTER for the Televid 77 models (order no. 42 300) can also be used on Televid 62 models, although this combination can lead to vignetting (distortion) at the edges. The ever ready case available as an accessory provides adequate protection against dirt and bumps. Its special design means that the LEICA TELEVID 62 / APO TELEVID 62 can be used without taking it out of the case. Ever ready case for LEICA TELEVID 62 / APO- TELEVID 62 with straight sight (Order no. 42 319) Ever ready case for LEICA TELEVID 62 / APO- TELEVID 62 with angular sight (Order no. The Leica digital adapter allows the Televid spotting scopes to be used with Leica digital cameras (and other models with the same lens mount). This combination with the Televid 62 models allows high-quality digital photographs to be taken of even very distant objects. Combined with a 20x eyepiece, telephoto lens focal lengths of over 1000 mm are possible (related to 35mm format). For details of the available adapters for Leica digital cameras and for further information, please contact your specialist Leica dealer or our Leica information service. [. . . ] Note: To protect the lens ­ particularly from severe environmental influences (salt water) ­ it makes sense to use an E 62 screw in filter. Warning: The eyepieces are only water-tight when they are locked in the Televid bayonet fitting. The Televid spotting scope itself is water-tight even without an eyepiece attached. LEICA APO-TELEVID 62 Model Housing Water resistance Lens system Straight sight Angular sight LEICA TELEVID 62 Straight sight Angular sight Metal and fiberglass-reinforced plastic, shock proof up to 100 g up to 3 m to DIN standards, nitrogen-filled Uncemented 2-lens achromatic system, multiple layer coating, hard coated outer lenses Uncemented 3-lens apochromatic system, special fluorite glass with anomalous partial dispersion, multiple layer coating; hard coated outer lenses Porro 62 mm 352 mm approx. [. . . ]