User manual LENCO DVP-1040

[. . . ] DVP-1040 10. 2" Wide 16:9 TFT LCD Monitor Slot In Disc DVD/DIVX Player Built-in DVB-T Tuner Built-in TV Tuner USB and 3 in 1 Card Reader Full Remote Controller CONTENT 1. PRECAUTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 01 2. CAUTIONS ON USING THIS PLAYER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 02 3. CHECKING ACCESSORIES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 03 4. [. . . ] Strong noise is produced when DTS discs is played. Note: Insert the earphones plug securely. No sound will be heard unless the earphones are securely connected. 8. 3 connecting to USB storage 1 Please connect the USB storage to the USB terminal of the main unit 2 The main unit can be read the contents in the USB storage automatically Note: 1) The USB terminal of the main unit support USB 1. 1 only. 2) The main unit can read the contents of USB storage when there is no disc in the main unit. 12 8. 4 connecting to memory card (SD/MMC/MS) 1 Please insert the memory card to the memory socket of the main unit 2 The main unit can be read the contents in the memory card automatically Note: 1) Please insert the memory card in right direction. 2) The main unit can read the contents of memory card when there is no disc in the main unit. 8. 5 Connecting to a TV set Before connecting Turn off the power of the player and the devices to be connected. 13 8. 6 Connecting to a digital amplifier that is not Dolby Digital / DTS / MPEG compatible Output the digital signals from the player's digital output to a digital amplifier that is not Dolby/DTS/MPEG compatible. Note: 1) Carefully check the player s digital output settings before connecting the player to an amplifier which is not Dolby Digital / DTS / MPEG compatible. 2) Do not play DVDs when the audio settings are not correct. Or may cause strong noise and damage your speakers. 8. 7 Connecting to active speaker systems Note: Please set the main unit to AV output mode. 14 8. 8 Connecting to a Audio/Video player system Note: Please set the main unit to AV input mode. 9. BASIC OPERATIONS 9. 1 Turning on/off the main unit 1) Turn power on (1) The main unit is in standby mode when the unit is powered (2) Press POWER (remote control unit) 1. 5 seconds or Push power switch to ON to turn on the unit when the unit is power, power indicator led off. 2) Turn power off Press POWER (remote control unit) 1. 5 second or Push power switch to OFF to turn off the unit, power indicator led light. 15 9. 2 Playing discs 1) Eject disc when there is a disc in the unit 2) Insert disc 3) Reading disc (1) Display DVD or VCD or CD in LCD. (2) The unit will be played for some disc (3) Press PLAY to play disc Note: 1) Please insert disc correctly 2) Do not use the disc that is scratched serious 9. 3 Removing discs 1) Press STOP to stop play 2) Press EJECT to eject disc 3) Take out the disc 9. 4 Mode settings (Brightness/Contrast/Color/ TFT display mode/TFT overturn mode/ PAL Plus(only for ATV mode) Please press MODE (remote control) or LCD display (in the main unit) to select a suitable mode for your favourite when the main unit is in play mode. 1) Press MODE, setting brightness; 2) Press MODE, setting color; 3) Press MODE, setting contrast; 4) Press MODE, setting LCD display mode; 5) Press MODE, setting overturn mode; 6) Press MODE, setting overturn mode; 7) Press MODE, In ATV mode, setting PAL Plus ON or OFF. 9. 5 Stopping the playing 1) Press STOP to pause the playing, the unit can memorize the play point 2) Press PLAY to continues play from the pausing point 3) Press STOP to stop the disc Note: The unit can not play to continues playing for some disc 9. 6 Pausing the disc 1) Press PLAY/PAUSE to pause the playing when playing 2) Press PLAY/PAUSE to continues playing 9. 7 Scanning forward and backward 1) Press REV/FWD (the remote control ) 1. 5 seconds to fast the playing when playing in forward/backward direction 2) Change the playing speed to X2, X4, X8, X20 and normal for every pressing REV/FWD in the remote control unit. 16 9. 8 Repeat playing the disc 1) A-B play mode (1) Press A-B, the LCD will show Repeat A(2) Press A-B again, the main unit will repeat the play from A to B. (3) Press A-B again, the unit will resume normal playing. 2) Repeat playing the title, chapter or track (1) Press REPEAT to select the title, chapter or track when the unit is in play mode (2) DVD: title, chapter; VCD or CD: track. 9. 9 Searching the disc 1) Press GOTO 2) Using cursor key and ENTER to select the proper playing item 3) Input digit to select playing time, title, chapter or track 4) Press ENTER to confirm the playing item 5) Press GOTO to resume the play mode 9. 10 Zoom playing Press ZOOM every times, the picture will change to 2X, 3X, 4X, 1/2X, 1/3X, 1/4X and normal. 9. 11 Program playing The main unit may play the list according to the following program list: 1) Press PROGRAM, the menu will be shown in the LCD 17 Hint: (1) T is for Title, C is for Chapter for DVD disc. NOTE: There is no title, chapter or track for some disc. 2) Using digit and cursor to select the list what you want. [. . . ] 12. 4. 2 Language When you select Language, the unit will be shown as following: You could use cursor Up/Down to select OSD Language. Use cursor left/ right to select OSD language which you want. You could use to return and use SETUP to exit. 12. 4. 3 Parent Control When you select Parent Control, the unit will be shown as following: You could use cursor Up/Down to select change pin, channel lock. [. . . ]