User manual LENCO DVT-1501 BROCHURE

[. . . ] In order to ensure the safety of the laser device, do not remove any cover and attempt to repair the unit. If any service is needed, please contact the distributor or its authorized service center. To reduce the risk of electric shock, do not remove the cover (or back). Refer servicing to qualified service personnel. [. . . ] Please refer to the instructions of "TV Operations" for details. or Notes on Discs 20 Compatible Disc Formats DISC LOGO DIAMETER 12cm PLAYBACK TIME/ PLAYABLE SIDES 133min (SS-SL) 242min (SS-DL) 266min (DS-SL) 484min (DS-DL) 74min DVD CD JPEG MPEG4 12cm 12cm 12cm Operation methods of some DVD discs are specified by the software manufacturer. Please follow the instructions of the disc. Care of Discs Holding Discs When loading or removing discs, try not to touch their playing surfaces as the right figure. Cleaning Fingerprints or stain on the disc may affect the quality of sound and picture. To clean your discs, use a soft clean cloth to wipe them. If necessary, moisten a soft cloth with diluted neutral detergent to remove heavy dirt or fingerprints. Do not wipe in a circular direction as the figure in the right middle (concentric scratches on the disc groove tend to cause noise). Gently wipe from the center of the disc to the outer edge as the right figure. Playback Operation 21 PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY BEFORE USING YOUR DVD PLAYER FOR THE FIRST TIME. WARNING: Do not play poor quality discs to avoid damaging the lens. Pre-operation 1. Connect the unit to power supply through the AC adaptor. Switch POWER ON/OFF to ON to turn on the player. Press the DVD/TV button to select DVD mode. Handing the disc with its printed side facing the front of the unit, insert vertically into the disc tray. (Referring to the right picture. ) Gently push the disc into the disc tray and it will be automatically be pulled into the disc tray. A DVD disc can be recorded with at most 32 subtitles. NOTE: This function is available for discs recorded with multi-subtitles INFO. button for detailed information during playback. SLOW button Press the SLOW button to play the disc slow forward and slow rewind at the following rates: s. f. 1/2 ­ s. f. 1/4 ­ s. f. 1/8 ­ s. f. 1/16 ­ s. r. 1/2 - s. r. 1/4 - s. r. 1/8 - s. r. 1/16 (s. f. : slow forward, s. r. : slow rewind). Press the button to resume normal playback. Playback Operation DVD Playback (continued) 25 TITLE button In general, the content of a DVD disc can be divided into several titles, and also there are several menus in a title. The title menu will appear on the screen. Press direction buttons ( ) or 0-9 number buttons to select the title or disc menu item you want to watch and then press the ENT button to confirm. CD Playback button Press the Press the button to pause during playback. button to resume normal playback. button During playback, press the button once to stop and then press the button to resume normal playback from the place where the button is pressed. Press the button twice repeatedly to stop playback completely. & buttons Press the / button to play fast forward/ rewind. Press it repeatedly, the fast forward/ rewind playback will be undergoing a speedchange of 2X, 4X, 8X, 16X, 32X in sequence. Press the button to return to normal playback. & buttons Press the track. / button to play the previous/next Playback Operation CD Playback (continued) 26 GOTO button Press the GOTO button to select desired disc starting time, track starting time or track. During playback, press it repeatedly and the screen will display as follows: Disc Go To:--:-- Track Go To:--:-- Select Track:--/N N refers to the total track number of the disc. [. . . ] Track 1 Track 2 Track 3 . . . . . . JPEG JPEG is a common picture format that has small file size and low quality loss rate of picture. Hundreds of pictures can be stored in a disc in this format. In order to utilize real digital album, use film to make a Picture CD in JPEG format. 41 Troubleshooting If you suspect there is something wrong with the DVD player, immediately turn the power off. Disconnect the power connector and check that there is no smoke or excessive heat coming from the unit. [. . . ]