User manual LENCO IPOD-BALL

[. . . ] Heat & Flame The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat. No naked flame sources, such as lighted candles, should be placed on the apparatus. Power Source The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. Where the AC/DC Adaptor is used as the disconnect device, the disconnect device shall remain readily operable. [. . . ] Accessories - iTunes USB cable x 1 - Auxiliary audio line in cable with 3. 5mm stereo plugs ; Length = 1 Meter x 1 - Auxiliary audio line in cable with 3. 5 Meter x 1 - iPod docking station cover x 1 - AC / DC power adaptor x 1 This model adopts different iPod models. If the docking port will not be used for an extended period of time, it is recommended to cover the docking port by using the "Dock Cover " insert (included). Select a suitable adaptor for your iPod (the one with your iPod at the time of purchase) and insert it into the docking area. Your iPod can now be inserted into the docking port by placing the connector on the bottom of the iPod onto connector in the docking bay. Caution : Please be careful when seating the iPod into the docking to avoid damaging the 30-pin connector on the iPod or in the docking system. When the unit is at power off mode, the Red colour power status indicator is on. Press the POWER (STANDBY) button once to turn on the unit and the power status indicator turns Blue. Note : Press the POWER button will toggle between iPod and AUX-IN mode, the Blue power indicator on. - When a song playback, press and hold the / button to perform high speed search forward / backward. - To skip to next or previous song, prese the / button. From the remote control, it can implement following operation as well: - To access iPod menu, press the MENU button. - You may press the navigation buttons ( Up / Down / Left / Right / Enter buttons) as from you iPod to highlight and select desired items. To turn off the unit, press and hold the POWER (STANDBY) button until the power status indicator turns Red. When the unit is in standby mode and the iPod is connected the unit will automatically charge the iPod's battery. The unit provides an iTunes connector located at rear of the unit and let you implement the iTunes function without unplug the iPod from the docking station. (note: below functions can only be set with the remote control. Treble setting : - Press the TREBLE button once entering Treble setting mode, the status indicator blinks between Pink and Blue light. - During the status indicator blinks (Pink/Blue) , press VOLUME button to adjust to the desired Treble level. - The unit will auto-exit Treble setting mode after few seconds and the Blue status indicator stay on. Bass setting : - Press the BASS button once entering Bass setting mode, the status indicator blinks between Pink and Blue light. [. . . ] Don't forget to switch off power of your external device as well. Do not subject the unit to excessive force, shock, dust or extreme temperature. Do not tamper with the unit's internal components. Clean your unit with a damp (never wet) cloth. [. . . ]