User manual LENCO L-80 USB

[. . . ] The mains plug is used as the disconnect device, the disconnect device shall be readily operable. WARNING To reduce the risk of the fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. [. . . ] POWER SWITCH This switch turns the power on or off. When playing a 45rpm record with a large center hole; place the 45rpm adapter on the center spindle. Set the cueing lever to the down position, the tone arm will descend slowly onto. Adjust the pitch to a desirable speed, move the pitch control slider up or down to adjust the speed. To suspend play, lift tone arm with cueing lever. When play is finished, raise the cueing lever, move the tone arm to the arm-rest and secure the tone arm with the arm clamp. SET-UP ASSEMBLY: Before you begin assembly please be sure all parts and accessories have arrived intact. please use the Check list below to identify and order parts and accessories. * Instruction manual * RCA cable * Slipmat * Platter * 45 rpm adaptor * Headshell * AC cord * Counterweight Note: * Do not connect the AC power plug before assembly has been completed. * Before turning the power on, make sure once again all the connections and power voltage settings are correct. Always turn off the power when connecting or disconnecting * Read this manual carefully before using the unit. Be sure to store the manual in a safe place for future reference. * Attach a stylus cartridge to the headshell before assembling the turntable unit. 1 Removing from carton: Carefully remove the main unit with the packing material intact from the box. [. . . ] The terminals of cartridges and the headshell lead wires are color coded. connect each lead wire to the cartridge terminals of the same color. White (L+) L CH (+) Blue (L-) L CH (-) Red (R+) R CH (+) Green (R-) R CH (-) CONNECTIONS: Before connecting the unit it is advised that you also consult your current equipment instruction manual. [. . . ]