User manual LENCO MC-129 MP3

[. . . ] Digital Mini Component System (RADIO CASSETTE RECORDER CD/MP3 PLAYER) MC-129 MP3 User s Guide LOCATION OF CONTROLS E-1 ENGLISH IMPORTANT SAFETY INSTRUCTIONS WARNING: TO PREVENT FIRE OR SHOCK HAZARD DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PRESENT BLADE EXPOSURE. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. This lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of insulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock presents Warning: to reduce the risk of electric shock, do not remove cover (or back ) no user serviceable part inside. Refer servicing to qualified service personnel. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Read these instructions. Install in accordance with the manufactures instructions. [. . . ] Press PLAY key to begin playing the tape. Adjust the volume to your desired listening level. AUTOMATIC STOP FEATURE When the cassette deck is operating in play or record mode and the end of the tape is reached, the unit automatically shuts itself off and returns all buttons to the off position. Load a cassette tape into the tape deck and close the door. Tune in to desired station by pressing the TUNING CONTROL/CD SKIP UP/DOWN CONTROL. RECORD key and PLAY key are engaged simultaneously. To hear what you recorded, press the REWIND key to start recording point, follow instructions in PLAYING A CASSETTE TAPE. NOTE: PAUSE FOR A MOMENT - Using the PAUSE key on the cassette deck instead of the STOP/EJ. key to momentarily interrupt recording gives you a much clear recording. RADIO RECORDING TIPS To temporarily pause the recording, press PAUSE key on the cassette deck. Press PAUSE key again to resume recording. Insert a blank cassette tape into the tape deck. Press the FUNCTION switch to select CD/MP3 playing mode. Open the disc compartment and load a disc and select the desired track you want to record. Press CD PLAY/PAUSE button to start CD playback. Press RECORD key and the PLAY key will automatically engage to begin recording. Press PAUSE key to interrupt or edit recording. To hear what you recorded, press the REWIND key to start recording point, follow instructions in PLAYING A CASSETTE TAPE. AUTOMATIC LEVEL CONTROL (ALC) This unit has the latest circuitry-Auto Level Control (ALC), While recording, adjusting the VOLUME control will not affect the recording volume, it keeps in a right and flat volume. USING THE CD/MP3 LOADING A DISC 1. Press the FUNCTION switch to select CD/MP3 playing mode. Place an audio CD/MP3 into the tray with the label side facing up. The display will show display after 5 seconds. Example : 11 CD READ , then the total number of tracks and playing time will appear in the 47: 12 5. [. . . ] Do not use solvents such as benzene, thinner commercially available cleaners, or antistatic spray intended for analogue records. Cleaning the disc lens E-7 After prolonged use, dirt or dust may accumulate at the disc lens. To ensure good playback quality, clean the disc lens with CD lens cleaner or any commercially available cleaner: Follow the instructions supplied with cleaner. Cleaning the heads and tape path To ensure good recording and playback quality, clean the heads, the capstan(s) and pressure roller(s) after every 50 hours of tape operation. [. . . ]