User manual LENCO MCI-400 V1.0

[. . . ] PRESS "MEM/CLK-ADJ" BUTTON (17) AGAIN TO CONFIRM. THEN FIRST DIGIT OF "0:00" ON DISPLAY(2)(IF SELECT 24HS MODE) IS FLASHING. PRESS SKIP OR SKIP BUTTON (10) TO SET THE CORRECT HOUR. PRESS "MEM/CLK-ADJ" BUTTON (17) TO STORE THE CORRECT HOUR. [. . . ] IF "STOP " BUTTON (9) IS PRESSED DURING PLAY OR PAUSE MODE, SYSTEM WILL GO TO STOP MODE. SKIP MODE (SKIP UP 1. 3. / SKIP DOWN ) DURING PLAY OR PAUSE MODE, IF "SKIP UP " BUTTON (10) IS PRESSED. IT WILL GO TO NEXT TRACK AND DISPLAY THE TRACK NO. DURING PLAY OR PAUSE MODE, IF "SKIP DOWN " BUTTON (10) IS PRESSED. IT WILL GO BACK TO THE BEGINNING OF THE TRACK, ORIGINAL TRACK NO. IS DISPLAY AND REMAIN THE PLAY OR PAUSE MODE. AFTER STEP 2, PRESS "SKIP DOWN " BUTTON (10) AGAIN WILL GO TO THE PREVIOUS TRACK AND REMAIN THE PLAY OR PAUSE MODE. FOR MP3 DISC 1. AFTER FOCUS SEARCH IS PERFORMING, THE TOTAL NUMBER OF TRACK AND ABLUM WILL BE SHOWN ON THE LCD DISPLAY (2). PRESS " FOLDER/ PRE-UP " (18) TO SELECT THE ALBUM NUMBER. PRESS " SKIP UP " OR SKIP DOWN (10) BUTTON TO SELECT THE TRACK NUMBER. WHEN THE DESIRED TRACK AND ALBUM IS BEING SELECTED, PRESS THE "ST/MO/ " BUTTON (19) TO START PLAYBACK. E-5 ID3 (TRACK/ALBUM TITLE) FUNCTION (BY REMOTE HANDSET) PRESS THE " ID3 " BUTTON UNTIL THE LCD DISPLAY (2) SHOW " FILE DURING PLAYBACK OF MP3/WMA FILE, THE SONG TITLE / ARTIST NAME / ALBUM NAME IS BEING DISPLAYED IN SEQUENCE . PRESS THE " ID3 " BUTTON AGAIN TO DISABLE THE FUNCTION. ". . . REMARK:IN THAT CASE OF NO NAME HAD BEEN ASSIGNED FOR THE TRACK, " NO TITLE " OR " NO ARTIST " IS BEING DISPLAYED" ON LCD DISPLAY (2). - NO TITLE/ALBUM NAME CAN BE RECOGNIZED IF THE INPUT FORMAT ON THE DISC/MASS MEDIA IS NOT SUPPORTING BY THE SYSTEM. - THE SYSTEM SUPPORT ONLY ENGLISH TEXT FOR ID3 FUNCTION MP3 TRACK FORMAT REQUIREMENT:- BIT RATE : 32 KBPS~320KBPS, SAMPLING RATE : 32KHZ, 44. 1KHZ AND 48 KHZ DECODABLE - THE PERFORMANCE OF PLAYING MP3 DISC IS VARIOUS FROM THE QUALITY OF RECORDING DISC AND THE METHOD OF RECORDING. FURTHERMORE, THE SEARCHING LEAD-TIME FOR MP3-CD IS LONGER THAN NORMAL CD DUE TO DIFFERENCE FORMAT. REPEAT/RANDOM MODE PRESS THE " PLAT MODE " BUTTON (7)DURING PLAYBACK TO SELECT REPEAT AND RANDOM FUNCTION, A SINGLE TRACK, SINGLE FOLDER (MP3 ONLY) OR ALL THE TRACKS CAN BE PLAYED IN DIFFERENCE MODE AS FOLLOW:- FOR CD (1) REPEAT 1 (2) REPEAT ALL TRACK (3) RANDOM (4) OFF MODE PLAY MODE REPEAT TRACK REPEAT ALL RANDOM OFF MODE INDICATOR ON LCD DISPLAY & FLASHING RAN -------------- FOR MP3/WMA DISC/FILE (1) REPEAT 1 (2) REPEAT 1 FOLER (3) REPEAT ALL TRACKS (5) OFF MODE INDICATOR ON LCD DISPLAY & FLASHING (4) RANDOM PLAY MODE REPEAT SINGLE TRACK REPEAT SINGLE FOLDER REPEAT ALL TRACKS RANDOM MODE OFF MODE RAN ----------------- REPEAT PLAY YOU CAN LISTEN THE DESIRED TRACKS OR FOLDER REPEATEDLY BY THIS FUNCTION. RANDOM PLAY YOU CAN LISTEN ALL THE TRACKS OR FOLDER IN A RANDOM ORDER BY THIS FUNCTION CD / MP3 DISC PROGRAMMING UP TO 20 TACKS CAN BE PROGRAMMED FOR DISC PLAY IN THIS FUNCTION. BEFORE USE, BE SURE TO PRESS THE " STOP " BUTTON (9) 1. SET IN CD MODE & STOP THE CD OR CD-MP3 PLAYBACK. PRESS THE "MEMORY/CLK-ADJ" BUTTON (17) , " MEM " WILL FLASH ON LCD DISPLAY (2). TO BE PROGRAMMED ­ " 0 P- 01 ". SELECT A DESIRED TRACK BY PRESSING SKIP UP OR DOWN BUTTONS (10). PRESS THE"MEMORY/CLK-ADJ" BUTTON (17) TO STORE THE TRACK INTO MEMORY. 7. REPEAT STEPS 3 AND 4 TO ENTER ADDITIONAL TRACKS INTO THE MEMORY IF NECESSARY. [. . . ] AND THEN PRESS "THE ALARM" BUTTON(6) TO CONFIRM NOW THE ALARM SETTING IS COMPLETED AND THE ALARM INDICATOR " " IS SHOWN ON LCD. REMARK IF THERE IS NO MUSIC SOURCE BEING DETECTED (SUCH AS CD) WHEN THE PRESET TIME IS REACHED, SYSTEM WILL DEFAULT TO " TUNER " FOR WAKE UP MODE AUTOMATICALLY. FOR TUNER WAKE UP, THE SYSTEM WILL PRESET AT THE LATEST RADIO FRQUENCY BEING LISTENED BEFORE SWITCHING OFF. ACTIVE/DE-ACTIVE ALARM FUNCTION 1. TO ACTIVE THE ALARM, PRESS THE " ALARM " BUTTON(6) UNTIL THE ALARM INDICATOR " ON LCD DISPLAY (2). " IS SHOWN " TO CANCEL ALARM FUNCTION BY PRESS AGAIN " ALARM " BUTTON(6) UNTIL THE TIMER INDICATOR " DISAPPEAR. SNOOZE FUNCTION PRESS " SNOOZE " BUTTON ON REMOTE CONTROL ONCE TO TERMINATE THE ALARM MODE TEMPORARILY, AND SYSTEM WILL RE-START AGAIN AFTER 10 MINUTES ON EACH PRESS. [. . . ]