User manual LENCO MES-220 DVX

[. . . ] Important Safety Instructions The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION: USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. The product contains a low-power laser device. [. . . ] Press the button again to cancel the item. 23 Playback Operation CD Playback When a CD disc is loaded, the player will read the disc. Then a playback menu will appear on the screen and the player will play the disc automatically by the default sequence of the disc. You can use the buttons to select the desired track. Or press the number buttons to input the number of the desired track first and then press the ENTER/ENT button to confirm to play. Buttons Operation PAUSE/ button Press the PAUSE/ button to pause during playback, and press the PLAY/ button to resume normal playback. STOP/ button During playback, press the Stop/ button once to stop playing and press the PLAY/ button to resume normal playback from the stopped point. Press the STOP/ button twice repeatedly to stop playback completely. Then press the PLAY/ button and the player will play from the beginning. & buttons Press the button to start fast forward playback. Press it repeatedly to fast forward at the speed of 2X, 4X, 8X, 16X and normal playback in sequence. Press it repeatedly to fast backward at the speed of 2X, 4X, 8X, 16X and normal playback in sequence. Press the PLAY/ button to resume normal playback during fast playback. & buttons Press the Press the button to go to the previous track. button to play the next track. 24 Playback Operation CD Playback (continued) REP button Press the REP button to repeat signal, folder or cancel the repeat in sequence. A-B Button Press the A-B button once to set the starting point A, press it again to set the end point B. Then the player will play the segment between A and B continuously. Press this button a third time to stop the A-B repeat. GOTO button Press the GOTO button to select desired track, track time or disc time. Use the direction buttons to highlight Track, Time or Disc Time. Use the 0-9 number buttons to input the desired numbers of track or time. And press the ENTER/ENT button to confirm. Then the player will begin playing from the selected track or time. Press it repeatedly to cancel the item. 25 Playback Operation JPEG Playback Pre-operation 1. Load a JPEG in the disc tray, the player will enter the disc searching status. The screen displays the root folder with several subdirectories/subfolders. Use the buttons to select a desired folder and press the ENTER/ENT button to confirm your selection. The screen enters the selected subfolder with several pictures. Press the buttons to select the desired picture and press the ENTER/ENT button to enter the playback. [. . . ] PROBLEM POSSIBLE CAUSE The disc cover may not be closed. There may not be any discs in the DVD drive. The disc may not be put in with the right way. The player's region code may not as the same as the region code of DVD disc. [. . . ]