User manual LENCO MES-221

[. . . ] Ensure that you observe the color coding when connecting audio and video cables. Note: During DVD play, the TV volume may be at a lower level than during TV broadcasts, etc. If this is the case, adjust the volume to the desired level. If the DVD/VCD/CD player is connected to the TV through a video cassette recorder, the picture may not be played back normally with some DVDs. [. . . ] f no key is pressed for a few seconds, it will skip to the next picture automatically. PICTURE ROTATIONS Press the RIGHT and the LEFT navigation buttons to rotate the picture Clockwise and anti-clockwise respectively. PICTURE FLIPS Press the UP NAVIGATION button to flip the picture vertically. Press the DOWN NAVIGATION button to flip the picture horizontally. PICTURE ZOOM IN/OUT Press the ZOOM button continuously, he picture zooms in by 125%, 150%, 200% or zooms out by 75%, 50% the original size. Press this button once more when the picture getting 50% size to return to the normal play. If the picture is enlarged, you may use the navigation buttons to view blocked parts of the picture. COLOR AND BRIGHTNESS ADJUSTMENT FOR THE LCD SCREEN) Press the SCREEN ON/OFF button on the remote control to adjust the color intensity and brightness respectively. Press and hold this button for a moment to open or close the TFT display. INITIAL SETTINGS Initial settings page is for you to make your preferred settings up for your player. Once the initial settings are done they are retained in the CPU of the player until otherwise modified. COMMON PROCEDURES FOR INITIAL SETTINGS 1. Use the navigation buttons to select the item you want to modify, press the PLAY/PAUSE button to confirm, setting page with further setting items displayed shows on the TV screen. Again use navigation buttons to make changes. Press again the PLAY/PAUSE button to confirm modifications. Use navigation buttons to switch to another setting on the main setting page. Press the SETUP button to exit main setting page. 1. GENERAL SETUP 1. 1 TV DISPLAY -it is used to select the TV scan mode, please set as per your TV set. Options: Normal/PS Normal LB Wide 1. 2 LCD MODE -it is used to select the LCD mode. Options: 4:3 16:9 1. 3 ANGLE MARK -it is used to select whether or not the multi-angle icon is display on the screen when a Multi-angle DVD disc is playing. Options: On: Icon will be displayed Off: Icon will be turned off 1. 4 OSD LANG -it is used to select different On Screen Display language for different user. 1. 5 SCREEN SAVER -when the player is not in used for several minutes, a running DVD logo will move across the TV screen to protect the TV screen. Options: On: Screen saver is enabled Off: Screen saver is disabled 2. [. . . ] Check that the TV channel is set to VIDEO or AV if viewing with a TV. Check that the LCD display is turned on. If it is closed, audio will not be output to the speakers. Check that the headphones are plugged into the PHONES socket. [. . . ]