User manual LENCO MES-224

[. . . ] MES-224 Twin 7 Display Car DVD/CD/MP3 Player with DivX Playback, USB Port and Card Slot Instruction Manual Please read this manual carefully before operation. For information and support, www. lenco. eu PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK) OF THE UNIT. REFER SERVICING ONLY TO QUALIFIED SERVICE PERSONNEL. For Customer Use: Enter below the serial number that is located on the bottom of the unit. Retain this information for future reference. [. . . ] Doing so will damage the surface of the disc permanently. 10 SPECIFICATIONS Main Unit 9W 198 165 37 mm 830 Monitor 0. 6 6W /PAL Video Input Audio Input 198 165 26 mm 493 Specifications and manual are subject to change without prior notice. 907-FD77-51D0-00R LOCATION OF CONTROLS Main unit ·· 11 10 /USB/SD 1 2 Front View 1 2 3 3 4 5 6 7 8 9 Integrated Stereo Speakers Power on Indicator Battery LED Indicator Lights red when charging the battery. Lights green when the battery is fully charged. Remote Sensor LCD Mode/USB/SD Button Briefly press this button to display the LCD Menu. · · · 4 5 16:9 or 4:3 3. To reset all items, select RESET by up/down direction button and then press ENTER button to confirm. Press and hold this button for a short while to display the working source menu, you can access the DVD/USB/Card using this menu. · 6 Setup To access the setup menu which various features of the player can be adjusted in. 7 Stop Press once to prestop the playback, press twice to stop completely. 8 Play/Pause Press the Play/Pause button to play the disc. Press up/down direction button to highlight item and then make adjustment by left/right direction button. Press up/down direction button to select SCREEN and then press left/right direction button to set screen dimension as 9 Up/Down/Left/Right / Enter buttons Press the direction buttons to select an item and press the ENTER to confirm 10 Fast Forward/Reverse To fast forward/reverse during video/audio playback. 11 7 TFT Display. For your reference: 1. Place a disc with the label facing up and push gently on the center of the disc so it goes into position. To start playing, press the PLAY/PAUSE button. (Some discs will start playing automatically). To Skip Forward/Skip Backward, press the NEXT/PREV button. To Fast Forward/Fast Backward, press/hold the NEXT/PREV button. LOCATION OF CONTROLS Main unit Left View Back View Right View 15 1 2 3 4 5 6 7 8 14 9 10 11 12 13 Left View DC 9V IN To connect to the supplied AC Adaptor/DC Car Cord for power supply. 1 2 Power Switch To turn on/off the unit. Right View 9 Headphone Jack To connect the headphone. Before connection, make sure that the volume is at low level. 10 SD/MMC Card Slot To Insert the SD/MMC card and to read datum on SD/MMC card by the main unit. 11 USB Port For use with USB flash drives. 12 Volume Dial To Adjust the Volume Level. Headphone Jack To connect to the supplied headphone. As the headphone is plugged in, the speakers' volume output will be OFF. 3 4 Coaxial Out To connect to an external speaker system by the coaxial cable. 5 Audio Jack To connect to an external speaker system by the supplied RCA cable. [. . . ] · The disc may be damaged or dirty. · Reset your TV's color system. · Ensure that the player is connected directly to the TV (and not through a VCR, cable box, satellite receiver, etc. ) The picture is not full-screen. · Change the aspect ratio setting of your player from the Setup menu. [. . . ]