User manual LENCO SCD-26

[. . . ] Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where it exits from the apparatus. Only use attachments/accessories specified by the manufacturer. Unplug the apparatus during lightening sorts or when unused for long periods of time. Refer all servicing to qualified personnel. [. . . ] Slide the BAND switch to select the desired wave band: FM/ FM ST. . Tune to required station by rotating the TUNING KNOB. Adjust the VOLUME CONTROL to desired volume level. Extend the TELESCOPIC ANTENNA to its full length if you are listening to FM broadcasting. Note: If the broadcasting program is too noisy when you are listening to FM stereo N-1 station, please slide the BAND switch from FM ST. The FM STEREO indicator will be on when you are receiving FM stereo program. Turn off the radio by switching the FUNCTION switch to "OFF" position E-3 USING THE CD/MP3 LOADING A DISC 1. Set the FUNCTION switch to CD/MP3 position. Place an audio CD/MP3 into the tray with the label side facing up. The total number of tracks will appear on the display after several seconds. To rem ove the CD, press CD DOOR OPEN/CLOSE to open CD com partm ent lid, grasp the CD by its edges, and carefully take it out. Note: To ensure good system perform ance; wait until the disc tray com pletely reads the disc before proceeding. If no disc is loaded into the com partment, or the disc is placed upside down, the display will show 00 . PLAYING A DISC 1. Press the PLAY/PAUSE button to start playback. The playback starts from track 1, will appear on the display To interrupt playback, press the PLAY/ PAUSE button, will disappear and the track number will flash on and off on the display. To resume playback, press the PLAY/PAUSE button again. To stop playback, press the STOP button, the total num ber of tracks appears in the display. SELECTING A DESIRED TRACK/PASSAGE To select a desired track Press the CD SKIP FORWARD/ BACKWARD button repeatedly in stop m ode or during play until the desired track appears on the display. Press the PLAY/PAUSE button to start play. PROGRAM TRACKS You m ay play the tracks (songs) on the disc in the order as you like. [. . . ] For exam ple, to select track 45, press +10 button 4 tim es, then press the CD SKIP FORWARD button five tim es, the display will show the track number 45. N-3 LISTENING TO USB FLASH DISK DEVICE 1. Set the FUNCTION switch to CD/MP3 position. Connect the USB Flash Disk Device into the USB PORT. If the USB is readable, the display will show USB, and then start to playback automatically from the first track. [. . . ]