User manual LENCO TFT-1020

[. . . ] LENCO TFT LCD DIGITAL AND ANALOG TV TFT-1020-User Manual For information and support, www. lenco. eu Warning Important Notes on Safety Before you use this product, please read carefully the corresponding parts about the signs on the product you have bought and keep it properly for future reference. Warning Electric shock, do not open Note: In order to reduce electric shock, please do not take off the cover. There is no component inside that users can maintain. Please ask qualified maintenance personnel to conduct maintenance. This sign indicates that there is dangerous high voltage inside, and it is dangerous to contact any component inside the product in any form. This sign prompts you to pay attention to the attached important notes on the operation and maintenance of the product. The notches and holes inside the cabinet, on the back and at the bottom of the cabinet are designed to provide necessary ventilation. [. . . ] You can perform different settings enter menus at current mode. And you can press mode key display mode menu, you can press up/down cursor buttons to select mode which you want with OK button enter. Display menu by pressing the Menu button; press the menu button again to go back to the topper menu. When menus are displayed, you can move the folders in horizontal directions with left/right cursor buttons. 4. 2. 2 Menu definition The Main menu includes following menu icons: , , , , , . To use the up/down cursor buttons You can enter the submenu list by pressing right cursor. Exit the menu list by pressing Menu. : You can select how the picture mode shall be sorted. There are four sort mode (personal, standard, dynamic and soft. ) are used here. Figure 4. 2. 1 Brightness Left/right cursor buttons adjust the brightness of the screen. Contrast: adjust the contrast of the screen. Sharpness: adjust the sharpness of the screen. : You can select how the audio mode shall be sorted. There are five sort mode (personal, standard, music, movie and sports. ) are used here. Figure 4. 2. 2 Bass Left/right cursor buttons adjust the bass of the screen. Treble: adjust the treble of the screen. Balance: adjust the balance of the screen. Audio channel: Left/right cursor buttons adjust the audio channel: Stereo, L and R Prefer Language: Left/right cursor buttons adjust the prefer language: English, German, Danish and so on. Audio Channel and Prefer Language menus only DTV mode and the program signal must contain. : You can select Country and the menu Language at the standard of local TV system. . In order to fit the person of different countries, the menu language can be set to different languages (English, Dutch, French, German, Italian, Portuguese, Spanish ) The default language is English. Here, you can set zoom mode and other too. Figure 4. 2. 3 Menu Language: Left/right cursor buttons adjust the screen: English, Dutch, French, German, Italian, Portuguese, Spanish . Zoom Mode: Left/right cursor buttons adjust the screen: 16:9, 4:3 Battery Information: right cursor buttons enter the battery information. IF the Machine charge battery, the Battery Information menu cant select. Select Country: Left/right cursor buttons adjust the screen: Germany, French, Poland, Portugal, Russia and so on Restore Default: Press the Left/right cursor buttons to enter next step, and press OK key to come back the factory default. Antenna Power: Left/right cursor buttons adjust the screen: on, off !Zoom Mode only operated in DTV, ATV and AV mode. If the machine turn on and used the outside power supplied or charge battery, the battery icon hide whenever on or off. If use the power antenna, please press the Left/right cursor buttons to ON. : (Only DTV mode) Under the Time Setting menu, you can set the time zone here in order to correct current time zone where you are. Figure 4. 2. 4 ! [. . . ] TROUBLESHOOTING Problem Possible causes What to do Check that the mains cable is plugged into the power socket Mains cable is not conn- Make sure the battery is ected. The LED does The battery isn't installed not light up/is not lit. Reattach the AC adapter and reinstall the battery, Condensed fluid may cause and press the power button to turn on the machine. Do not use the machine for at least one hour if there are some condensed fluids in it. [. . . ]