User manual LENCO TFT-1021

[. . . ] Before you use this product, please read carefully the corresponding parts about the signs on the product you have bought and keep it properly for future reference. In order to ensure the reliable operation of this television and to prevent it from getting overheated, do not stop or cover these notches and holes. - Do not cover the notches and holes with cloth or other materials. - Do not put this television on bed, sofa, carpet, or on the surface of other similar object, in order to avoid causing the blockage of the notches and holes. [. . . ] 1 After entering into area search page, system will scan all programs one by one under frequency points of current countries or regions selected automatically. 3 If any program is detected and the scanning process is finished, system will exit the scanning page And save the program, at the same time return to the "installation menu" and to play them in a small Configuration provides individualized system setup function; you can configure the system according to your own hobby and demand. You can enter Configuration menu via the menu (MENU->Digital TV->Configuration), as shown in Figure 3. OSD Via OSD option setup, you can set the user interface display mode according to your own demand . Via the menu (MENU->Digital TV->Configuration -> OSD), you can enter OSD menu, as shown in Figure 3. When the cursor moves on the option in OSD menu, the values corresponding to this option on the right of the menu press to move upward and downward to choose the options in OSD menu. Time on OSD Option sets whether to display system time in full-screen play channel. Move the cursor to Time on OSD option, press to choose between ON and OFF. OSD Timeout Option sets some information hint dialogue box and displays time length, move the cursor to OSD Timeout Option, press to choose among 1-6 seconds. OSD Language option: The system has the user interface supporting a couple of languages; you can set language via OSD Language option: Move the cursor onto OSD Language option, Press to enter OSD Language List as shown in Figure 3. 1st audio and 2nd audio Language option: Press to enter the currently supported Audio Language list, in the Audio Language list, press to choose language, press ENTER to confirm; 2. TV TV setup provides convenient TV input mode, you can via menu (MENU->Digital TV->Configuration -> TV) enter TV set, as shown in Figure 3. All options are listed on the left of the menu, when the cursor moves to the option on the left of the TV menu, the values corresponding to this option can be displayed on the right of the menu. Move the cursor to TV option, press to choose circularly among the options, and the TV mode set can be effective immediately; under the TV setup menu, it includes follows: (1). Aspect Ratio: 4:3PS/4:3LB/16:9 You can adjust TV mode accord to the actual situation of you receiving equipment (2). System setup System Setup menu can provide convenient system setup, you can via menu (MENU->Digital TV->Configuration -> System Setup) enter System Setup menu, as shown in Figure 3. Press to move upward and downward the cursor to choose option. When the cursor stays on the option: press to move the cursor into the right list, press to move upward and downward the cursor to choose, press ENTER to confirm; (1). surround: To set stage effect , OFF , Concert , Church , Passive , Live (2). LCN: To set the LCN on or off, if the LCN choose ON, the front of the programs display LCN number, (3). Area: To set scanning area and choose, choose area to download preset channel settings. You can set Timer Mode in Time page: Timer Mode: set Time Mode, Date: set date, Time: set time, GMT Offset: set GMT Offset, Summer Time: set summer time. [. . . ] It can also be potentially dangerous to play loud music while walking, especially at pedestrian crossings. Hearing experts advise and against continuous, loud and extended play. If you experience a ringing in your ears, reduce the volume or discontinue use. Problem Possible causes What to do Check that the mains cable is plugged into the power socket Mains cable is not connected. [. . . ]