User manual LENCO TFT-3201

[. . . ] European WEEE & RoHS Directives On 13th February 2003, the Official Journal published the Waste Electrical and Electronic Equipment (WEEE) Directive, and the Directive on Restrictions on Hazardous Substances in Electrical and Electronic Equipment (RoHS). Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC The WEEE Directive covers almost all types of consumer and industrial electrical and electronic equipment operating at maximum voltages of 1000V a. c. in 10 categories, including computers & IT equipment, certain toys product, household appliances, mobile phones, TV's, DVD's, lighting and Medical devices, etc. The WEEE Directive will place the responsibilities on producer for separate collection points to the environmentally sound treatment, re-use and recycling will be covered by producers for their own products. [. . . ] Always store the remote control in dry and normal room temperatures. If the remote is not performing satisfactorily, replaced the batteries. The batteries should be replaced after one year as a precaution. - If the remote control will be idle for a long time (above 1 month) take out the batteries to avoid leakage from the batteries. - Clean the entire remote control especially the battery compartment if any leakage found. - Do not mix different types of new and used batteries together to avoid leakage. 13 5. Connection Accessory Devices Connecting the DVD player or HDTV Set-top box to the HDMI input Switch off the LCD TV and external equipment before connecting cables. Connect the LCD TV to the DVD player or HDTV Set-top box with the HDMI cable. Connect the DVI AUDIO input terminal to the audio output terminal of HDTV Set-top box with DVI output terminal, and a DVI to HDMI conversion cable should be adopted. Please ensure the Power Cord is connected and the Power Switch button turned on before it is operated. Press Standby button to turn on the LCD TV, then turn on external equipment. The LCD TV and DVD or Set-top box are working at the same time. Press Source button to select HDMI signal source. Note: The above step 2 is used if you connect DVI output to the HDMI input of the LCD TV. The above step 1 is used if you connect HDMI output to the HDMI input of the LCD TV. HDMI do not support PC. HDMI white red DVD or Set-top box DVI DVD or Set-top box 14 Connecting the Computer Switch off the LCD TV and external equipment before connecting cables. Connect the LCD TV to the computer with the D-Sub (VGA) cable. Connect the audio output of the computer to the audio input on the LCD TV. Please ensure the Power Cord is connected and turn on the Power Switch button before it is operated. Press the Standby button to turn on the LCD TV, then turn on the external equipment. The LCD TV and Computer are working at the same time. Press Source button to select VGA signal source. Red White Connecting the DVD player or HDTV Set-top box using YPbPr input Switch off the LCD TV and external equipment before connecting cables. [. . . ] Wring water out of the cloth before cleaning to prevent water from penetrating into the housing. Wipe the display with a dry cloth after cleaning. If the display fails or the performance changes dramatically, check the Display in accordance with the following instructions. Remember to check the peripherals to pinpoint the source of the failure. [. . . ]