User manual LENCO TFT-360

[. . . ] In order to ensure the reliable operation of this television and to prevent it from getting overheated, do not stop or cover these notches and holes. - Do not cover the notches and holes with cloth or other materials. - Do not put this television on bed, sofa, carpet, or on the surface of other similar object, in order to avoid causing the blockage of the notches and holes. - Do not put this television in a limited space, such as bookcase or embedded cupboard unless there is proper ventilation conduction. [. . . ] The remote control range is 4M or less within a±45° horizontal and ±5° vertical angle from the remote sensor. If the remote's battery is low, the remote may not function properly, so replacing the battery immediately is recommended. 4. NAVIGATING WITH MENUS 4. 1 Basic operation methods of TV set 1. Connect with power supply and turn on the power switch. In normal status, the power light is red. If you only use the battery power supply, the light is blue. Press up/down cursor buttons to choose the desired channel. Press left/right cursor buttons adjust the sound volume of the TV !Attention: The following describes the functions of your TFT-360 while watching Analog TV and terrestrial digital TV. Some of the functions described here are dependent on the Service Provider and can only be used if they are included in the transmitted program information. 4. 2 Digital TV and analog TV 4. 2. 1 Menu summarize You can open the main menu by pressing Menu key at the remote control or front panel. You can perform different settings enter menus at current mode. From the factory the access code is set to 0000. After set, the access code has to be entered before you can watch locked channels and change the password. Figure 4. 2. 5 :( Under the DTV mode) Under the search menu, when you want to search for channels, a channel search procedure can be performed in different ways at Automatic Search and Manual Search. And you can edit favorite or skip channel lists in this menu. If you edit channel favorite list ON, Press the FAV button can display the favorite List. Figure 4. 2. 6 Under the Program Search menu, Use right cursor button enter the submenu: Figure 4. 2. 7 The TV list may contain a lot of channels. To sort your own lists you can make it easier to handle channels by LCN, number and name. :( Under the ATV mode) Figure 4. 2. 8 Program Search menu under the ATV mode only add color system and sound system submenu. Color System: Left/right cursor buttons adjust the screen: AUTO, PAL, SECAM Sound System: Left/right cursor buttons adjust the screen: BG, DK, I, L !If the Program List menu does not exist . The system will automatically start the first time installation. Figure 4. 2. 9 Press OK button to select YES; Figure 4. 2. 10 Press OK button to select Country at the standard of local TV system . and Press CH+/CHbuttons to select other items. The region item is decided by the signal of different country's broadcasting companies. 4. 2. 3 Special Features at the DTV mode Electronic Program Guide (EPG) Pressing EPG key will open the EPG page. In the EPG you will find information about the programs for the current day and for the following seven days. (Provided that this information is included in the channel transmission from the distributor) You may also select the type of program you want information about, like Movie, Sports or Music. [. . . ] It may create a traffic hazard and is illegal in some areas. It can also be potentially dangerous to play loud music while walking, especially at pedestrian crossings. Hearing experts advise and against continuous, loud and extended play. If you experience a ringing in your ears, reduce the volume or discontinue use. 6. [. . . ]