User manual LENCO TFT-721

[. . . ] GENERAL INFORMATION ABOUT THE TFT-721 TFT-721 is a portable digital TV set; it can be used in a car or outdoor. Throughout this manual you will notice that everyday operation of your TFT-721 is based on a series of user friendly on-screen displays and menus. These menus will help you get the most from your TFT-721, guiding you through installation, channel selection, viewing and many other functions. Using the buttons on the remote control can perform all functions, and using the buttons on the front panel can also perform some of the functions. [. . . ] To move the menu list into focus, use the up/down cursor buttons You can enter the submenu list by pressing OK. To open this menu you will be asked to enter your access code. From the factory the access code is set to 888888. After set, the access code has to be entered before you can watch locked channels. You need to enter the access code every time you start the TFT-721 from standby. 11 Change Pin Code: You can change the access code for entering parental setting and locked channel. Search Encrypt: This function can set: you need to input pin code when re-search channels. It prevents someone else change you setting. 8 TimeZone Setting: you can set the time zone here in order to correct current time zone where you are. Restore Default: If you continue from here, all your previous settings, access code and favourite channels, etc. If you do not want to reinstall, you can leave this menu when the warning is displayed by pressing "Menu". Clear Channels: If you continue this, all your previous channels will be erased. Book List You can check the booking programs you set at here. Conversion: you can select different display formats (LetterBox, Pan&Scan, PillarBox, Verticalcut, FullFrame and Auto) to show the TV program. LetterBox will give a complete picture, but leaves black areas at the up and down. Pan&Scan will fill up the screen vertically but cut some information from the left and right sides of the picture. PillarBox will give a complete picture, but leaves black areas at the left and right. Verticalcut will fill up the screen horizontally but cut some information from the up and down sides of the picture. FullFrame will fill up the screen size with distortion. Auto will fit the screen size automatically. Standard: When the TFT-721 is connected to the TV channels, you may need to select the correct TV standard system. 16 System Information When you enter the System Information folder, you will find general information about which hardware and software version your TFT-721 is running on, you can also find the signal information and battery information about TFT-721. [. . . ] To bring the TFT-721 out of close screen mode Change battery. Check that nothing blocks the front panel. Do not use headphones while driving, cycling, or operating any motorized vehicle. It may create a traffic hazard and is illegal in some areas. [. . . ]