User manual LENCO WR-34 PLL

[. . . ] Lift up the battery compartment Insert 3xUM-3 (AA) size batteries. Make sure the batteries are positioned in accordance with the diagram 5. indicated. Replace the battery compartment AC adaptor (not included) The AC adaptor for use with this radio should provide 4. 5volts DC output at 200 mA center pin (-)negative. [. . . ] 3. Press [SLEEP] button to select the period of time (90, 80, 70, 60, 50, 40, 30, 20 or 10 minutes), Each additional press of the [SLEEP] button will reduce the remaining sleep time in 10-minute increments, to the nearest 10 minutes. Example: If there are 90 minutes remaining in sleep, pressing the button once will reduce the sleep time to 80 minutes, twice will reduce it to 70 minutes, etc. 4. 6. Wait for about 5 seconds and the sleep function will be activated automatically. When listening to the Radio, this function turns the Radio off automatically after a predetermined time To eliminate the SLEEP mode press the [SLEEP] button until "SLEEP" symbol disappears or press [ON/OFF] button. The radio will no longer go off automatically. Alarm Mode 1. Press the [AL ON/OFF] button, the digit hours and minutes with "ALARM" symbol is blinking, will be displayed on the LCD for 5 seconds. While the time display is blinking, press and hold down the [DOWN/UP] button or intermittently until the desired wake-up time is reached. Press the Alarm button to complete alarm time setting. The "ALARM" symbol will appear on the display Indicating the alarm is set, the buzzer will sound automatically when a predetermined time. To permanently cancel the alarm, press the [AL ON/OFF] button, the "ALARM" symbol will be removed from the Display. Radio operation Switch on your radio by pressing the [ON/OFF] button. The radio will be turned on at the last preset radio station and volume. A. Scan Tuning: The unit is equipped with an Auto-Search function and can automatically search for the next clear channel. To turn on the radio, press [ON/OFF] button. . Slide the [SW/MW/FM] button to the desired band, SW, MW or FM. Press and hold the [DOWN/UP] button for 2 seconds and automatically the value of the frequency will Keep increasing or decreasing until a clear channel is found. [. . . ] Simply press one of Preset buttons 1-5 to recall the required preset stations. To recall preset stations 6-10, press [+5] button, then the Preset button 1-5. Lock switch The lock switch located on the top side of your radio is to prevent accidentally while carrying it around. Slide the [LOCK] switch to the ON position, the symbol will appear in the display, The [ON/OFF] and all Other buttons will be disabled. [. . . ]