User manual LENOVO E46

[. . . ] Lenovo E46 User Guide V1. 0 Notes · Before using this information and the product it supports, be sure to read Important safety information and Notices in the User Guide attached with the computer first. · Some instructions in this guide may assume that you are using Windows® 7. If you are using other Windows operating system, some operations may be slightly different. If you are using other operating systems, some operations may not apply to you, but it won't substantially affect your use of this computer. [. . . ] The battery is automatically charged while the computer is running on AC power. Install the battery pack Refer to the supplied User Guide attached with the computer to install the battery pack. Connect the computer to an electrical outlet 1 Connect the power cord to the AC adapter. 2 Connect the AC adapter to the AC power adapter jack of the computer firmly. 3 Plug the power cord into an electrical outlet. 11 Chapter 2. Learning the basics Turn on the computer Press the power button to turn on the computer. Configure the operating system You may need to configure the operation system when it is first used. The configuration process may include the procedures below. · Accepting the end user license agreement · Configuring the Internet connection · Registering the operating system · Creating a user account Putting your computer into standby/sleep state or shutting it down When you finish working with your computer, you can put it into standby/sleep state or shut it down. Putting your computer into standby/sleep state If you will be away from your computer for only a short time, put the computer into standby/sleep state. When the computer is in standby/sleep state, you can quickly wake it to resume use, and bypass the startup process. 12 Chapter 2. Learning the basics To put the computer into standby state, do one of the following. · Click start and select Stand By from the Turn Off Computer menu. · Press Fn + F1. Note: Wait until the power indicator light starts blinking (indicating that the computer is in standby state) before you move your computer. Moving your computer while the hard disk is spinning can damage the hard disk, causing loss of data. To wake the computer, do one of the following. · Press any key on the keyboard. Shutting down your computer If you are not going to use your computer for a day or two, shut it down. To shut down your computer, click start and select Turn Off from the Turn Off Computer menu. 13 Chapter 2. Learning the basics Using the touchpad --------------------------------------------------------------------- 1 2 3 To move the cursor on the screen, slide your fingertip over the pad in the direction in which you want the cursor to move. The function corresponds to that of the left mouse button on a conventional mouse. The function corresponds to that of the right mouse button on a conventional mouse. Touchpad Left click button Right click button Note: You can enable/disable the touchpad using Fn+F8. The touchpad may be disabled when manipulated with two fingers together. 14 Chapter 2. Learning the basics Using the keyboard ---------------------------------------------------------------------Your computer has a numeric keypad and function keys incorporated in its standard keyboard. Numeric keypad The keyboard has keys that, when enabled, work as a 10-key numeric keypad. To enable or disable the numeric keypad, press Fn+Insert. Note: The indicator will light on if the numeric keypad is enabled. 15 Chapter 2. Learning the basics Function key combinations Through the use of the function keys, you can change operational features instantly. To use this function, press and hold Fn ; then press one of the function keys . 2 1 16 Chapter 2. Learning the basics The following describes the features of each function key. Fn + Esc: Fn + F1: Fn + F2: Fn + F3: Fn + F4: Fn + F5: Fn + F8: Fn + F9: Fn + F10: Fn + F11: Fn + F12: Fn + Insert Fn + Delete Fn + PrtSc: Fn + Pause Fn + Fn + : : Turn on/off the keyboard light. [. . . ] Using the Internet Wireless connection -------------------------------------------------------------------Wireless connection provides mobile access to the Internet, allowing you to stay online anywhere the wireless signal covers. Divided by the signal scales, wireless connection to the Internet can be built based on the following standards. Wi-Fi Wi-Fi networks cover a small physical area, like a home, office, or small group of buildings. An access point is necessary for the connection. WiMAX networks connect several Wireless LAN systems to cover a metropolitan area, providing high-speed broadband access without the need for cables. [. . . ]