User manual LENOXX BP600

[. . . ] Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in risk of fire or electric shock. Never spill liquid of any kind on the product. To reduce the risk of electric shock, do not disassemble this product, but take it to a qualified serviceman, when some service or repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks. [. . . ] To be certain of the number of devices you may connect to your line, as determined by the REN, you should contact your local telephone company to determine the maximum REN for your calling area. NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, try the following: 1. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for assistance. GENERAL The FCC prohibits customer-provided terminal equipment to be connected to party lines or to be used in conjunction with coin telephone service. This phone is hearing aid compatible. 2 PH-600082799 MS V. 2 E Congratulations for purchasing a Lenoxx Sound telephone. Some of the features of the PH-600, BP-600 and BP-601 are: LAST NUMBER REDIAL - Useful if line is busy. DESK OR WALL MOUNTABLE - No special hardware needed. TONE/PULSE SWITCHABLE - Select the desired dialing mode. ADJUSTABLE HANDSET VOLUME CONTROL - Adjusts and raises volume of receiver. FLASH BUTTON - For alternate pay service such as call waiting or getting a new dial tone quickly. FULLY MODULAR JACKS - For easy plug-in installation. REVERSIBLE HANDSET HOLDER FOR WALL USE - Holds Handset in up-right position, if your phone is wall mounted. YOUR SALES RECEIPT You will need your sales receipt should you ever need warranty service. You should also save the packing material if you want to move or ship this phone. INSTALLATION INSTRUCTIONS INSTALLATION TELEPHONE BASE HANDSET STRAIGHT TELEPHONE CORD To Telephone Jack COILED HANDSET CORD 1. Insert the modular plugs of the Coiled Handset Cord into the jack of the Telephone Handset and into the jack on the SIDE of the Telephone Base (either end can be plugged in). Insert the modular plugs of the Straight (not coiled) cord into the modular jack at the TOP of the Telephone Base and into the Telephone Jack. NOTE: To insure your phone is properly connected, lift Handset and listen for dial tone. RINGER ON/OFF SWITCH ON - Normal setting, rings on incoming calls. OFF - The ringer does not sound, for undisturbed privacy. [. . . ] 2. Contact your phone company to have your line changed to Tone and Pulse service. We warrant this product to be free from defects in material and workmanship under normal use for a period of 1 year after purchase and we will repair it free of charge or replace it at no charge, should it become defective under this warranty, providing you submit proof of purchase (sales slip) with the set. During the initial 1 year period after original purchase, we will service or exchange, at no charge, the set that is returned to LENOXX ELECTRONICS CORP. (LENOXX will pay the shipping back to you). After the initial 1 year period expires, we will repair the unit covering any part(s) that need to be replaced at no charge, but will charge for the cost of labor, return postage paid by LENOXX. [. . . ]