User manual LENOXX HT395

[. . . ] MODEL HT-395 Digital Audio Home Theater System Turns Your DVD Player Into a Home Theater Computer Compatible - Also Turns Your Computer Into a Home Theater (Cable Included) The Perfect Sound System for Your DVD Player · Incredible surround sound, perfect for DVD viewing & enhanced TV game experience. · Just add your TV & DVD player; everything else is in the box. PLEASE READ CAREFULLY BEFORE USE · Front panel GAME INPUT jacks. · Dual DIGITAL inputs - COAXIAL & OPTICAL. IB-HT395-WM-E-073003 SAFETY INSTRUCTIONS WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. FCC NOTE WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. IMPORTANT SAFETY INSTRUCTIONS 1. [. . . ] Press the SOURCE button on the main set several times till the TV/VCR indicator lights. Go to Page 20 for detailed instructions. NOTE: Your cable or antenna connection to your TV are not touched with this connection. Leave your antenna cable to your TV as you normally would. No changes will be made to your current antenna connections. 12 IB-HT395-WM-E-073003 TV + DVD CONNECTIONS Home Theater System + TV + DVD Player NOTE: Some newer TV sets have several VIDEO INPUT jacks. You may use one of these for your DVD player and the others for connecting to the VIDEO OUT jacks of the component. If your set is older and only has a single VIDEO INPUT jack, you may buy a switch box to change video signal from DVD to game, etc. 1. Insert the COAXIAL cable (included) or OPTICAL cable (not included) into the COAXIAL or OPTICAL DIGITAL INPUT jack on the back of your HOME THEATER SYSTEM, and into the DIGITAL (COAXIAL or OPTICAL) jack on your DVD player, this will allow your DVDs Dolby Digital Audio sound to play through your HOME THEATER SYSTEM. NOTE: For a Dolby Digital recorded DVD disc, the sound will come out of all 5 speakers plus the subwoofer. For a Stereo DVD disc (2 channel), the sound will only come out of the 2 front speakers plus the subwoofer. This set will decode and automatically play back whatever sound system was recorded on the DVD or audio disc. To manually change stereo (2 channel) audio to Dolby Pro Logic, press the SURROUND button. The sound will come out of all 5 speakers plus the subwoofer. NOTE: Make sure your DVDs AUDIO OUTPUT is set to DIGITAL. NOTE: DTS signals can not be decoded by this set. 2. 8. Insert the video cable into the VIDEO OUT jack on the back of your DVD player, and into the VIDEO IN jack on the back of your HOME THEATER SYSTEM. Insert the video cable into the VIDEO IN jack on your TV, and into the VIDEO OUT jack on the back of your HOME THEATER SYSTEM. Insert the AC power cord into an AC outlet. Press the POWER button on the main unit (not the REMOTE) to turn on the main power of the set. Next press the ON/STANDBY button on the REMOTE to turn the set on (or off). Press the SOURCE button on the main set several times till the COAXIAL or OPTICAL indicator lights. Make sure your DVD player is on and follow your DVD players instructions. Go to Page 20 for detailed instructions. NOTE: Your cable or antenna connection to your TV are not affected with this connection. Leave your antenna cable connected to your TV as you normally would. [. . . ] Press the SURROUND button on your remote to hear all speakers. If your DVD disc was recorded with PCM, this is normal. Make sure the Center speakers volume is set to a normal level (see Page 22). Adjust the center speaker volume by pressing the volume control buttons of the center speaker on the REMOTE (see Page 22). [. . . ]