User manual LENOXX PH417

[. . . ] BIG BUTTON MEMORY PHONE WITH VOLUME CONTROL MODEL: PH-417 OPERATING INSTRUCTIONS · BIG BUTTONS FOR EASIER VIEWING & DIALING · RECEIVER VOLUME CONTROL · 3 ONE-TOUCH MEMORY BUTTONS · INCOMING CALL INDICATOR LAMP · FLASH & REDIAL/PAUSE BUTTON · TONE/PULSE SWITCHABLE DIALING · DESK OR WALL MOUNTABLE · 15 FOOT EXTRA LONG COIL CORD PLEASE READ CAREFULLY BEFORE USE IB-PH417-WM-E-022804 IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, the following basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury: 1. Read and follow all instructions and warnings. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. [. . . ] RINGER ON/OFF switch - Turns off ringer for undisturbed privacy. WALL MOUNT SLOTS - (on the back of the set) For mounting onto wall. 4 IB-PH417-WM-E-022804 INSTALLATION INSTRUCTIONS INSTALLATION HANDSET TO TELEPHONE WALL JACK REAR OF THE TELEPHONE BASE STRAIGHT TELEPHONE CORD To Telephone Jack COILED HANDSET CORD 1. Insert the modular plugs of the COILED HANDSET CORD into the jack of the TELEPHONE HANDSET and into the jack on the left side of the TELEPHONE BASE. Insert the modular plugs of the STRAIGHT TELEPHONE CORD into the modular jack at the REAR of the TELEPHONE BASE and into the TELEPHONE WALL JACK (either end can be plugged in). RINGER SETTING This switch is located on the rear of the set. Select the desired function of the ringer. O N - Normal setting of rings on incoming calls. NOTE: If your RINGER switch is in OFF position, only THIS phone will not ring, other phones in your home on the same line will ring. NOTE: Even if your RINGER switch is in OFF position, the indicator lamp will flash when there is an incoming call. TONE/PULSE SWITCH Select the type of dialing that you desire or that your telephone system requires. TONE - The phone will operate using tone dialing. (If your phone doesn't dial out, switch to PULSE. ) PULSE - The phone will dial using rotary pulse dialing. NOTE: Even when your phone is set to pulse service, this phone can be switched to temporary tone dialing for access to services that require tone signaling like button after dialing in pulse and your computer systems. Just press the buttons can now be used for tone signaling for this call only. 5 IB-PH417-WM-E-022804 PHONE OPERATION RECEIVING CALLS AS A NORMAL TELEPHONE When the phone rings: 1. Lift the HANDSET and speak into the mouthpiece of the HANDSET. Hang up the HANDSET when the conversation is completed. MAKING CALLS AS A NORMAL TELEPHONE 1. Select the desired dialing mode with the TONE/PULSE switch (do this only the first time). Pick up the HANDSET and listen for a dial tone. Dial your call. LAST NUMBER REDIALING The last number you called from the keypad can be redialed by pressing the REDIAL/ PAUSE button. This is useful if the number called is busy. Get a new dial tone and press the REDIAL/PAUSE button. This phone will remember the last number dialed even overnight. If you do not want anyone to know which number you dialed last, pick up the phone and press any number & hang up. PAUSE FUNCTION If you make a dial with a pause in the number, simply press the REDIAL/PAUSE button for the pause. VOLUME CONTROL You can adjust the sound level of the handset receiver by adjusting the RECEIVER VOLUME setting. INCOMING CALL INDICATOR This lamp located near the RECEIVER VOLUME button will flash when the phone rings. [. . . ] Can make calls, but phone does not ring. LIKELY CAUSES Plug disconnected from jack. Line out of order. RINGER switch in OFF position. If your other telephones are "ROTARY" type phones, your line may be conditioned to accept PULSE dialing only. [. . . ]