User manual LENOXX PH559

[. . . ] ® 13 MEMORY CALL WAITING CALLER ID SPEAKER TELEPHONE OPERATING INSTRUCTIONS MODEL PH-559 CALL WAITING CALLER ID FUNCTION* 70 NAME & NUMBER CALLER ID MEMORY HANDS-FREE SPEAKERPHONE TONE/PULSE SWITCHABLE DIALING AUTOMATIC TIME & DATE DISPLAY ONE-TOUCH CALLER ID CALL BACK 3 ONE-TOUCH SPEED DIAL BUTTONS 10 TWO-TOUCH SPEED DIAL MEMORY LOCATIONS WALL/DESK USABLE REQUIRES 4 AA BATTERIES OR AC ADAPTOR (BOTH NOT INCLUDED) * TO USE THE CALLER ID AND CALL WAITING FEATURES OF THIS PHONE, YOU MUST SUBSCRIBE TO CALL WAITING CALLER ID SERVICE FROM YOUR PHONE COMPANY, AND REMEMBER TO INSTALL BATTERIES NOTE: READ AND FOLLOW THESE INSTRUCTIONS BEFORE USING YOUR TELEPHONE IB-PH559(9803F)-WM-E-090103 TABLE OF CONTENTS Battery Safety Instructions IB-PH559(9803F)-WM-E-090103 Limited Warranty Trouble Shooting Wall Mounting Caller ID Features Understanding the Caller ID Service When you Receive a Call Call Waiting Viewing the Caller ID List Calling back from the Caller ID List Storing the Phone Numbers from the Caller ID List Deleting the Data from the Caller ID List Using Message Waiting/Mailbox Telephone Features Memory Dialing Storing Phone Numbers into Memory Making Calls with 3 One-Touch Speed Dialing Buttons Making Calls with 10 Two-Touch Speed Dialing Memory Buttons Basics Choosing Tone or Pulse Dialing Making and Receiving Calls Hands-Free (Speakerphone) Operation Volume Control and Ringer Setting Last Number Redialing and Pause Function Getting Started Step 1: Checking the Package Contents Step 2: Powering the Phone Step 3: Telephone Installation Step 4: Setting up the Telephone (Reset the phone) Location of Controls Important Telephone Company & FCC Information Important Safety Instructions 1 2 3 4 5 6 7 7 8 8 8 9 9 9 10 10 10 10 11 11 11 11 12 12 13 13 14 16 18 IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following: 1. Read and follow all instructions and warnings. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. [. . . ] 8 IB-PH559(9803F)-WM-E-090103 Hands-Free (Speakerphone) Operation ANSWERING CALLS WITH THE SPEAKERPHONE 1. After the phone rings twice, press the SPEAKER button, the SPEAKERPHONE INDICATOR will light, and the hook icon will show in the display. The display will show the Count Up Call Timer after a few seconds. Adjust the speakerphone volume by sliding the SPEAKER VOLUME control on the right side of the phone. To end the call, press the SPEAKER button again. The SPEAKERPHONE INDICATOR will go off and the display will return to Time and Date mode. MAKING CALLS WITH THE SPEAKERPHONE 1. Press the SPEAKER button to get a dial tone - no need to lift the handset. The SPEAKERPHONE INDICATOR will light and the hook icon will show in the display, the Count Up Timer will start after a few seconds. Adjust the speakerphone volume by sliding the SPEAKER VOLUME control on the right side of the phone. To end the call, press the SPEAKER button again. The SPEAKERPHONE INDICATOR will go off and the display will return to Time and Date mode. will NOTE: When pick up the HANDSET or press the SPEAKER button, the hook icon show in the display. If this icon shows in the display while the phone is not in use, remember to check if the HANDSET is replaced properly or the SPEAKER button is pressed to off. Volume Control and Ringer Setting Adjust the handset volume Adjust the ringer ON or OFF Slide the HANDSET VOLUME control (LOUD or NORMAL). ON - Normal setting, the phone rings on incoming calls. OFF - To turn off the ringer, for undisturbed privacy. NOTE: Only this phone will not ring, other phones on the same line will continue to ring normally. If you have subscribed to the Caller ID service, the callers number and/or name appears on the display when you received a call (see page 11). Last Number Redialing and Pause Function 1. Pick up the HANDSET or press the SPEAKERPHONE button. The last dialed number appears in the display and is automatically dialed. TO CHECK THE LAST PHONE NUMBER DIALED While the handset is on the base, press the REDIAL/PAUSE button. The number appears in the display for 3 seconds. NOTE: If the last dialed number exceeds 16 digits, only 16 digits will be displayed. Example: In an office where you need to dial a 9 first to get an outside line. Dial the number 9 and press REDIAL/PAUSE button, and then dial the phone number. [. . . ] Handset clip was not installed properly for wall use. The caller may have an unlisted or blocked number to prevent Caller ID identification, or it may be an overseas call or you may have noise on the line during that call. Check with your telephone company if this service is available and if you have subscribed for it. Your MEMORY button has no stored number. [. . . ]