User manual LERVIA KH 1410 CYCLONE VACUUM CLEANER

[. . . ] Arrange for defective power plugs and/or cables to be replaced at once by qualified technicians or our Customer Service Department. To avoid the risks of suffocation, store the bags out of the reach of babies and small children. Inform your children about the appliance and its potential dangers so that they do not play with it. This appliance is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or deficiences in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the appliance is to be used. [. . . ] Allow the power cable 9 to pull itself in slowly. Before every utilisation check to ensure that all filters are correctly inserted and that no openings are blocked. The filters must show no sign of damage and must be dry. Pull the power cable 9 from the cable storage up to the yellow marking. If you do not intend to use the vacuum cleaner for an extended period, shorten the telescopic tube o as much as possible and place the storage hook i in the storage bracket 4. If you do not intend to use the vacuum cleaner for an extended period, empty the dust collector t and clean both it and the filters (see the chapters , , Filters" and , , Cleaning and care"). Empty the dust collector t at the latest when the MAX marking is reached or the suction power has noticeably diminished. Lamellen filter: For the filtering out of light dust particles. This filter should be cleaned every two months (see chapter , , Lamellen filter"). Motor protection filter: Should the lamellen filter not function properly, the motor protection filter prevents larger dust particles from damaging or destroying the motor. This filter should be checked every 6 months. exhaust filter: For filtering the smallest dust particles from the blown-out exhaust air. This filter should be checked every 6 months. Before emptying the dust collector t, remove the plug 9 from the power socket. Turn the dust collector t to the side so that it can be lifted out. replace the dust collector t into the vacuum cleaner. The lateral lugs must fit into the recesses in the vacuum cleaner. Turn the dust collector t so that it can no longer be lifted up. The filters can become blocked after a period of time. Observe absolutely the given time periods for cleaning and checking. To take the lamellen filter out, proceed as follows: Before taking the filter out, remove the plug 9 from the power socket. Afterwards allow the lamellen filter and the filter grill to dry out (ca. [. . . ] Your statutory rights are not restricted in any way by this warranty. Before starting to trace the error on the appliance yourself, absolutely remove the power plug 9 from the wall socket. Insert the power plug 9 into the power socket. If necessary, use a long pe tube o or the suction hose wooden stick for this. [. . . ]