User manual LERVIA KH 2323 HAND STEAM CLEANER

[. . . ] ¸ Angle nozzle: For turning the stream of steam, e. g. You can connect the angle nozzle either directly to the boiler in front or via the extension element. ¹ Round brush: For scrubbing firmly caked dirt. You can connect the round brush either directly to the boiler in front or via the extension element. [. . . ] if hissing can still be heard when pressing the steam switch). Otherwise, hot steam can escape rapidly upon opening!· Do not operate the device with an empty tank. If the water reserve is used up, unplug the power cord to prevent overheating. · Let the accessories cool before removing them. · Only use the original accessory parts for this device. Other parts may not be sufficiently safe. · Never let children or elderly persons work with the device unattended as they may not always properly appreciate the possible hazards. · Wear gloves, protective glasses and breathing protection when attempting to remove substances hazardous to health. 4 5. Operation First test on a less visible area whether the material to be cleaned is suitable for high pressure steam, for instance: · Painted wood or leather can be bleached by steam. · Protective wax coatings can be removed by steam. · Plastics can be melted by steam. · Soft plastics can deform when exposed to steam. · Cold glass or mirror surfaces can snap when encountering hot steam. If you wish to clean windows, you must first preheat them, for instance by applying the steam over large areas from a greater distance, then moving it progressively closer. · Acrylic, velvit and linen react sensitively to hot steam, as do plastic fibres. a) Attaching / Removing Accessories Warning: Make certain that the power cord is unplugged before attaching or removing accessories. Attached accessories can still be hot after prior operation! Select the accessory appropriate for the intended cleaning ( - , ¸) according to the description in Section 3. Slide the accessory onto the front connection nozzle and turn it 1/4 turn . . . · clockwise to lock it (turn tight), · counter-clockwise to remove it. b) Filling and refilling with Water Warning: Before refill water: · Let the device cool down, otherwise there is a risk of scalding. [. . . ] Remove deposits from the boiler after about 10 - 15 uses. To do this, fill the boiler with clear water as described in 5. b). Then close the lid and shake the device forcefully. Clean the outside surfaces and the power cord with a slightly damp wash cloth. [. . . ]