User manual LERVIA KH 2424 STEAM CLEANER

[. . . ] This will help reduce hazardous body currents in the event of an error. NEVER direct jets of steam towards electrical appliances or heat or moisture sensitive objects. High temperatures are to be expected at the steam exit and lid threads during operation and for up to 30 minutes after removing the power cable. Do not touch these areas until they have cooled down completely. [. . . ] Cold glass or mirror surfaces can crack when sprayed with hot steam. If you wish to clean windows, you must first preheat them, for instance by applying the steam over large areas from a greater distance, then moving in progressively closer. Draw the glass attachment i in sweeps from top to bottom over glass surfaces. Wipe the rubber edge and the lower window border dry with a cloth after every sweep. To release it, press the locking button u down and pull the accessory off. To use the angle nozzle f or the round brush g, the narrow-jet nozzle h must first be attached. Allow the appliance to cool down, to avoid being scalded. Remove the plug from the power socket, to avoid the risk of an electric shock. Note: The appliance is fitted with a safety mechanism which prevents the lid being opened q should there still be steam in the boiler t. Press the steam switch w until the steam in the boiler t has been completely released. Fill the appliance with a maximum of 320 ml of cold water using the measuring beaker s and funnel d. caution: Do not overfill the appliance. Excessive pressure can result if filled with too much water. Warning: ALWAYS hold the device upright during use ­ never tilt the appliance to an angle greater than about 45 degrees (in any direction). Hot water could drip out and cause scalds. You may now advance as close to the area to be be cleaned as the material itself can tolerate steam. Wipe away any possible water residues with a dry cloth. Should the steam power diminish, it is an indication that the steam in the boiler t has all been used. Should no more steam come from the nozzle after a short period, the water has been completely used up. When the boiler is filled with water and the lid q is firmly closed: · Place the appliance on a tilt-safe even surface and insert the plug into a power socket. Danger: Do not open any part of the housing. there are no user-serviceable elements inside. [. . . ] It has been carefully produced and meticulously checked before delivery. Please keep your receipt as proof of purchase. Contact your service centre by telephone in case of questions pertaining to the warranty. Your goods can be transmitted free of cost only in this manner. [. . . ]