User manual LERVIA KH 4414 THERMAL HEAT BINDING MACHINE

[. . . ] it is also NOT intended for commercial or industrial applications. The warranty does not provide compensation for damage caused by improper use of the appliance!This appliance is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or deficiences in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the appliance is to be used. Children should be supervised to ensure that they do not play with the appliance. [. . . ] Should you do so, appliance safety can no longer be assured and the warranty will become void. Never attempt to bind flammable, heat-sensitive and/or meltable materials and do not bind drawings made on temperature-sensitive paper or material that could undergo changes in colour or quality when subjected to heat. Although this thermal binder satisfies all relevant safety norms and standards, functional errors can never be completely discounted - as with all electrical appliances. Functional errors with the appliance could cause damage to the documents being bound. If you do, this could lead to overheating and cause irreparable damage. Do not leave the appliance unattended when in use. On this first use the development of a light odour may occur, caused by production residues (a slight smoke development is also possible). This is normal and dissipates after a short time. Fold the retainer bracket 8 upwards, until it engages, and draw the document holder 2 out. Insert the plug into a mains power socket. As soon as the green control lamp 6 glows the appliance has reached its operating temperature. Select a suitable thermal binder cover for your document: Number of sheets 80g/m2 20 30 60 Brochure thikkness in mm 2 mm As soon as an acoustic signal sounds and the control lamp 6 glows constantly you can remove the thermally bound brochure from the binding shaft 1. After use, place the ON/OFF switch 4 at O and remove the plug from the mains power socket. If you are binding particularly thick documents, with a spine width of 20 mm (200 sheeds), then repeat the binding process approx. Always remove the plug from the mains power socket before you clean the appliance!Never submerse the appliance into water or other liquids!Tap the sides of the sheaf of papers a few times to ensure that ALL of the sheets are lying exactly above each other. Lay the sheets into a suitable thermal binder cover and then tap them down a couple of times, against and using the cover spine. Slide the thermal binder brochure through the reteainer bracket 8 into the binding shaft 1 such that the spine of the brochure makes firm contact with the hotplate on the floor of the thermal shaft 1. Allow the appliance to cool down completely. [. . . ] Only in this way can a post-free despatch for your goods be assured. The warranty covers only claims for material and manufacturing defects, not for wearing parts or for damage to fragile components, e. This product is for private use only and is not intended for commercial applications. In the event of misuse and improper handling, use of force and interference not carried out by our authorized service branch, the warranty will become void. [. . . ]