User manual LERVIA KH 4477

[. . . ] Read the operating instructions carefully before using the appliance for the first time and preserve this booklet for later reference. Niniejsz instrukcj naley zachowa, aby móc take póniej z niej skorzysta, w przypadku przekazywania urzdzenia osobom trzecim naley przekaza take instrukcj! [. . . ] Always place the guillotine cutter on a firm surface when using it. Should the inertness of the guillotine cutter become such that the cutting blade falls back to its start position by itself, tighten the adjusting screw at the pivot point of the guillotine (Offset screwdriver for hexagon socket screw SW 6). Do not cut more than the stipulated paper volume/ cutting height. Unsuitable material and exceeding the cutting height could lead to dislocation of the cutting head as well as damage to the cutting blade. This guillotine cutter is intended for the cutting of paper and transparencies. High durability and clean cuts are to be achieved exclusively through proper handling of the appliance and the use of suitable materials. Q Cutting blade with handle w Safety guide e Size scalings r Adjusting screw Position the item to be cut under the safety guide w. Make use of the size scalings e to align the item exactly. Secure the item to be cut by pressing firmly down on the safety guide w. You receive a 3-year warranty for this appliance as of the purchase date. The appliance has been manufactured with care and meticulously examined before delivery. Please retain your receipt as proof of purchase. [. . . ] The warranty becomes void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorized service branch. Your statutory rights are not restricted in any way by this warranty. [. . . ]