User manual LEXIBOOK APPAREIL PHOTO NUMERIQUE BARBIE AVEC FLASH

[. . . ] Exe" in the Run dialog text box (where D:\ is your CD-ROM drive) and press Enter. - Please wait between the installations processes of the software and the camera driver (the installation program may take up to 1 minute before starting). - You must install the driver before downloading pictures from the camera. [. . . ] Press the Shutter button (1) within 3 seconds to confirm and switch on the flash. Press the Menu button (8) until the icon appears on the lower left corner of the LCD screen. Press the Shutter button (1) within 3 seconds to confirm and switch off the flash. The camera will beep once to confirm that a picture is taken. The number of pictures you can still take in memory is shown on the LCD screen. Note: When the camera's memory is full, if you try to take a photo the LCD screen will display "00" and the camera will beep two times. Note: the camera will launch the slide show only if there are 2 photos, or more, stored in your camera's memory. Press the up button (10) or the down button (11) to browse manually through your photos. In Camera mode: Delete the last picture taken Press the Menu button (8) two times; the icon will appear on the LCD display. Press the Shutter button (1) within 3 seconds to delete the last picture taken. deleting all files Press the Menu button (8) one time; the icon will appear on the LCD display. Press the Shutter button (1), the number of pictures you can still take in memory will flash on the LCD. Press the Shutter button (1) again within 3 seconds to delete all the pictures stored in the camera. In playback mode: Delete the last picture taken Press the up button (10) or the down button (11) to exit the slide show. Press the Shutter button (1); you will hear a continuous « beep » sound. Press the Shutter button (1) again to delete the last picture taken. You will hear a small beep sound and the LCD screen will turn on when the camera is connected to your PC. Select the "913D camera" driver from the list of devices and follow the instructions to download your photos. [. . . ] To make use of the warranty or the after-sales service, please contact your retailer and supply proof of purchase. Our warranty covers material or installation-related defects attributable to the manufacturer, with the exception of wear caused by failure to respect the instructions for use or any unauthorised work on the equipment (such as dismantling, exposure to heat or damp, etc). Environmental Protection Unwanted electrical appliances can be recycled and should not be discarded along with regular household waste! [. . . ]