User manual LEXIBOOK DJA400DES

[. . . ] Unpacking the device When unpacking, ensure that the following elements are included: 1 x DJA400 digital camcorder / 1 x USB cable / 1 x waterproof case / 2 x helmet mount / 1 x bike mount / 2 x stickers / 1 x CD-ROM / 1 x hand strap / 1 x instruction manual WARNING: All packaging materials, such as tape, plastic sheets, wire ties and tags are not part of this product and should be discarded. cHARGING THE BATTERIES Note: Before using the camcorder for the first time, please remove the protective film of the camcorder's LCD screen. to recharge the internal lithium battery (350mAh) , proceed as follows: 1. Open the rubber cover that protects the mini USB jack. [. . . ] Please refer to the sections "Playing video files (Playback)" to learn how to view your saved videos. To learn how to delete video files, please see section "Taking Photos (Capture Mode) / Deleting pictures". Turn the camcorder on and press MODE button to set the device to video mode 2. The video icon is displayed at the top left corner of the LCD screen. Select a small size resolution for longer recording time. there are two options: (HD) 1280 x 720 / (VGA) 640 x 480 2. Loop Recording Time Set a time limit for a video recording and when the time is up, it will start another video. Press the shutter to stop the recording. Rotate Use this function if you have a car mount (not included). Note: when you select "Off", the image is turned upside down for easier viewing. Motion Detection When this function is activated, the camcorder starts recording automatically when it detects motion. The recording automatically stops when no motion is detected for more than 10 seconds. "Date" menu For more information about the "Date" menu, please refer to the "Date" menu section. "Setup" menu For more information about the "Setup" menu, please consult the "Setup" menu section. Turn the camcorder on and press MODE button to set the device to capture mode. The Capture icon is displayed on the top left of the LCD screen. Using the LCD screen (8) to frame your subject, hold the camcorder steady. Press the Shutter button (3) to take a photo. The image taken will appear briefly on the LCD screen. notes: · In Photo mode, the number of photos that can still be stored on the memory card is displayed in the upper right corner of the screen. When the memory is full, "Card Full" will appear on the screen. Make sure you transfer your photos to your computer. [. . . ] After fixing the camcorder to the mount correctly, use a strap to fix them to the helmet. Insert a strap into the two ends of the mount, adjust length according to the helmet's size, and tie the strap up to your helmet. Helmet mount without strap Attach the rubber sticker onto the back of the waterproof casing and then stick it onto your helmet. Or, attach the camcorder onto the tripod and attach the rubber sticker on the helmet mount and then stick it onto the helmet. [. . . ]