User manual LEXIBOOK RL2000

[. . . ] Should any abnormal function occur, unplug the AC/DC adapter from the mains socket and replug it again. Note: When the main unit's LCD display becomes dim, it indicates that the batteries are low and need to be changed. For radio power supply For clock power supply Rechargeable batteries are to be removed from the product before being charged. rechargeable batteries are only to be charged under adult supervision. [. . . ] The day of the week can be displayed in 6 different languages: English (EN), French (FRA), Italian (ITA), Spanish (ESP), German (DEU) or Portuguese (POR). When the DST function is turned on, the 4. Press the SET key to confirm your selection and go to the alarm setting. Note: In time setting mode, if you do not press any key for 10 seconds, the unit will automatically go back to clock mode. Use the and keys to adjust the hour, then press SET to confirm and adjust the minutes. Use the and keys to adjust the minutes, then press SET to confirm and go to the next setting. Use the and keys to select the alarm type: "FM" (to wake up with one of the 20 preset radio stations from "FM01" to "FM20") or "BEEP" (to wake up with the regular alarm ringtone). Press the SET key to confirm the new settings and go back to the alarm time display. Use the and keys to switch on or switch off the alarm then, press the SET key to confirm and go back to clock mode. When the alarm rings, press the SET, RADIO, or keys to stop it. The alarm will ring again the next day at the same time. When the alarm rings, press the "SNOOZE/LIGHT" key to switch on the snooze function. the icon is displayed on the LCD screen and the alarm will ring again 7 minutes later. To switch off the snooze function and stop the alarm, press and hold the SET, RADIO, or keys for 2 seconds. The alarm will ring again the next day at the same time. note: · If you don't press any key when the alarm goes off, it will ring for 5 minutes. In alarm time setting mode, if you do not press any key for 10 seconds, the unit will automatically go back to clock mode. Press the or keys to select a preset number between the 20 numbers available (from "FM01" to "FM20"). Use the or keys to scan the radio frequencies up or down. Press and hold the keys to auto-scan to the next or the previous radio station. Once the desired station is assigned to the selected preset number, press the SET key to confirm and save the change. Repeat the above process from step 2 until all the preset numbers are assigned to a radio station. [. . . ] Remove the batteries if the unit is not going to be used for an extended period of time. This product is covered by our two-year warranty. To make use of the warranty or the after-sales service, please contact your retailer and supply proof of purchase. Our warranty covers material or installation-related defects attributable to the manufacturer, with the exception of wear caused by failure to respect the instructions for use or any unauthorised work on the equipment (such as dismantling, exposure to heat or damp, etc. [. . . ]