User manual LEXIBOOK RP200

[. . . ] The unit will receive the RCC signals every day at 2am. â· The RCC signal can also be triggered by holding the key for 2 seconds in time mode. â· When the unit is searching or receiving the RCC signal (which lasts about 5 minutes), none of the keys is working except the key. â· Press and hold the key for 2 seconds if you wish to stop to the RCC signal search. [. . . ] It will ring again 10 minutes later, unless the snooze function is turned off. When the countdown is paused, press the key if you wish to reset it. The RP200 radio displays 6 FM groups (FM1 to FM6) and each group has 5 memory spaces (S1 to S5) available to store up to 30 radio frequencies. Press the [RADIO] key to turn on the radio or the radio wake-up function. To store a frequency into one of the 5 spaces available (S1 to S5), select a frequency and press and hold for 2 seconds the space key (S1 to S5) you wish to store it in. Once a frequency is stored, simply press the corresponding space key to tune in to that frequency. This function allows you to adjust the clock to a time zone. In time mode, press [MODE] twice to select the world time clock. Press the key to select the city in which you are located. When the local time is the same as the world time, the icon flashes. This function allows you to scan all the radio frequencies within the reception range of your unit and saves them into the radio memory spaces. The first frequency will be saved in the S1 space of FM1, the second frequency in S2, FM1, and the last one in S5, FM6. Press the radio key to turn on the radio. `SCN' is displayed onscreen during the auto scan and the frequency digits move up quickly. Once the auto scan is over, the first frequency stored will be displayed. Key to toggle between temperature display To set the time at which you wish the unit to count down from, press and hold [SET] until hour digit flashes. In time mode, press [MODE] four times to enter the radio mode. To set the time at which you wish the radio to turn on, press and hold [SET] until hour digit flashes. When using a DC adaptor (optional and not included) - If an external transformer is plugged into the DC jack, the projector will stay on while the projector switch is set to the position . - Please only use a 3v adapter with a positive centre . Please contact your retailer to get a compatible adaptor following this specification. Remove the battery cover on the bottom of the unit. [. . . ] For warranty or after-sales service, please return the product to the retailer with proof of purchase. Our warranty covers material or production defects attributable to the manufacturer and excludes any damage arising from the disrespect of the instructions for use or any inappropriate handling of the unit (such as dismantling, exposure to heat or moisture, etc. Com Environmental Protection Unwanted electrical appliances can be recycled and should not be discarded along with regular household waste!Please actively support the conservation of resources and help protect the environment by returning this appliance to a collection centre (if available). [. . . ]