User manual LEXIBOOK RP200SP

[. . . ] When the RP200SP is brought within this range, its auto-control mechanism will override all manual settings. The clock automatically starts scanning the signal after new batteries are inserted in the main unit. When receiving the radio signal, the Radio Tower symbol starts to blink. A complete reception generally takes about 10 minutes, depending on the strength of the radio signal. [. . . ] - During the 10 minutes snoozing period press and hold the Snooze/ Light button for 2 seconds to stop the alarm. It will ring again the next day at the same time. This function allows you to adjust the clock to a time zone. In time mode, press [MODE] three times to select the world time clock. Press the key to select the code of the city in which you are located. When the local time is the same as the world time, the icon flashes. Key to toggle between temperature display To set the time at which you wish the unit to count down from, press and hold [SET] until hour digit flashes. When the countdown is paused, press the key if you wish to reset it. The RP200SP radio displays 6 FM groups (FM1 to FM6) and each group has 5 memory spaces (S1 to S5) available to store up to 30 radio frequencies. Press the [RADIO] key to turn on the radio or the radio wake-up function. To store a frequency into one of the 5 spaces available (S1 to S5), select a frequency and press and hold for 2 seconds the space key (S1 to S5) you wish to store it in. Once a frequency is stored, simply press the corresponding space key to tune in to that frequency. This function allows you to scan all the radio frequencies within the reception range of your unit and saves them into the radio memory spaces. The first frequency will be saved in the S1 space of FM1, the second frequency in S2, FM1, and the last one in S5, FM6. Press the radio key to turn on the radio. `SCN' is displayed onscreen during the auto scan and the frequency digits move up quickly. Once the auto scan is over, the first frequency stored will be displayed. In time mode, press [MODE] four times to enter the radio mode. To set the time at which you wish the radio to turn on, press and hold [SET] until hour digit flashes. This function allows you to program the time duration (5 to 85 minutes) after which the radio will automatically stop playing. Hence, you can fall asleep without worrying about turning the radio off. Set the time duration after which the radio will turn off using the or key. [. . . ] â· When cleaning the display and casing, only use a soft damp cloth. Do not use solvents or scouring agents as they may mark the LCD and casing. Do not attempt to make any repairs to the alarm clock yourself. This product is covered by our two-year warranty. [. . . ]