User manual LEXIBOOK SM1820

[. . . ] SM1820GB 11/04/2005 10:19 Page 1 MeteoClock® "Elegance Evolution" SM1820 + ASM30 - Instruction Manual INTRODUCTION Congratulations on your purchase of this weather station, MeteoClock® SM1820 "Elegance Evolution". Please take the time to read and understand this manual so you can begin to enjoy the convenience and features this product has to offer. Lexibook® digital stations measure not only the time in progress ­ thanks to their built-in clock- but also the actual and upcoming weather. The MeteoClock® SM1820 incorporates the following functions: - Thermometer: The temperature is displayed in real time to the nearest tenth of a degree Celsius. [. . . ] It is also recommended that the remote sensor is placed as close as possible to the main unit to eliminate any interference. The remote sensor can also be wall-mounted. To do so, locate the wall-mounting hole at the back of the sensor (upper part) and fix it on a hook or nail. Main unit The main unit can be fixed on the rotating/pivoting base or on the wall-mounted base (both included). To use the base, fix the main unit's socket (located under the unit) into the base's jack. Place the base on a smooth, stable surface. To use the wall-mounted base, insert a screw in each wall-mounting hole (2) and fix it to a wall. Then, fix the main unit's socket into the wall-mounted base's jack. 8 Copyright © Lexibook 2005 SM1820GB 11/04/2005 10:19 Page 9 BACK LIGHT: To use the back light, press [A18], located below the main unit LCD display. The back light stays on for 5 seconds. CLOCK AND ALARM SETTINGS Time and Date Setting: 1. The setting sequence is displayed in the order: Hours © Minutes © Seconds © Year © Month/Day sequence © Month © Day © Time Zone © Day-of-week language. Press and hold [B4] to enter the manual Clock/Calendar setting mode. Time and date: Press the "+" [B10] or "-" [B11] buttons to adjust the settings and press [B4] to confirm each setting. The month and day sequence gives you the option to select whether the month or the day is displayed first. Day of the week : It can be displayed in different 8 languages: for English, select EN; German (GE), French (FR), Spanish (SP), Italian (IT), Dutch (NE), Danish (DA), and Russian (RU). Note: you will automatically exit the time setting mode after 5 seconds of inactivity. 12/24 Hour Display mode: Outside the manual time setting mode, press the [B10] key to select the 12 or 24 hours mode. Copyright © Lexibook 2005 9 SM1820GB 11/04/2005 10:19 Page 10 Alarm Clock Function: 1. The alarm sequence is as follows: Time © Alarm 1 2. © Alarm 2 © Time Outside the manual time setting mode, press [B4] to scroll to Alarm 1 (Alarm 2 ). Press and hold [B4] to set the desired alarm. Use the [B10] and [B11] buttons to adjust the hour then press [B4]. Use the [B10] and [B11] buttons to adjust the minutes then press [B4]. Use the [B10] and [B11] buttons to turn the alarm ON and OFF and then press [B4] to confirm your alarm settings. [. . . ] Your weather station displays the tide status [A19] as follows: H: High Tide M: Medium Tide L: Low Tide FURTHER INSTRUCTIONS FOR MULTI-SENSOR USE If you have one or two additional sensors, you can place them in a different location in your house; in a bedroom, for example. Your main unit can collect the temperature and humidity data of up to three remote sensors. Copyright © Lexibook 2005 15 SM1820GB 11/04/2005 10:19 Page 16 Set up: To set up a new sensor, follow the instructions given on page 5. Make sure you set every sensor to a different channel. Temperature and humidity and display : You can view the humidity and temperature readings of your different remote sensors by pressing the [B2] key. [. . . ]