User manual LEXIBOOK SM880

[. . . ] I Maximum three selectable RF channels with wireless Thermo Sensor. Foot-Stand mounting: Clip the main unit bottom part into the smallest hook of the foot-stand. The grid stripes of the foot-stand should be positionned on the back of the main unit (behind it). Weather Forecast function: I Automatically, when you insert or change main unit batteries, weather icon will flash during 10 seconds. [. . . ] Weather Forecast function: I Automatically, when you insert or change main unit batteries, weather icon will flash during 10 seconds. I Or manually, press "+12/24" key during 3 seconds, the icon will flash, you can settle it. I If there is any inconsistency of weather forecast between Local Weather Station and this unit, the Local Weather Station's forecast should prevail. Remote Sensors installation: Your weather station SM880, is provided with 2 colorful remote sensors thermometer, each one dedicated to a different part of the house : 1) Black can be used : in garden, on balcony or windowsill (Channel CH1 recommended for use outside) 2) Ivory: for bedroom, or kid's one, bathroom (Channel CH2) Outdoor thermo sensors unit registration procedure: I The weather station automatically starts receiving transmission from Outdoor Thermo Sensors for outdoor temperature after new batteries are inserted. I The sensors will automatically transmit temperature to the weather station after batteries inserted. Batteries compartment of thermo sensor is locating behind the back cover, unscrews to open. I Each sensor is already registered with CH1 or CH2. That means that each sensor is automatically transmitting on a different channel. I Press "TX " button on the thermo sensor unit to transmit temperature to the weather station manually. The weather station gives a "beep" sound if it received the temperature. I All Setting Mode will automatically exit in 5 seconds without any adjustment. NB on Weather Forecast I After setting up, reading for weather forecasts should be discarded for the next 12-24 hours. This will allow sufficient time for the Weather Station to operate at a constant altitude and therefore result in a more accurate forecast. I After having completed the settings of your weather station, please discard the readings of the weather forecast for the next 12-24 hours. This will allow sufficient time for the Weather Station to operate at a constant altitude and therefore result in a more accurate forecast. Absolute accuracy cannot be guaranteed regarding weather forecasting. I The weather forecasting feature is estimated to have an accuracy level of about 75% due to the varying areas the Weather Station has been designed to be used in. Problem: Temperature reading of outdoor remote sensor seems to high. receiver is no longer receiving remote sensor signals or display. Solution : Ensure the remote sensor is out of direct sunlight, and away from sources of heat. [. . . ] receiver is no longer receiving remote sensor signals or display. Solution : Ensure the remote sensor is out of direct sunlight, and away from sources of heat. - Make sure remote sensor is away from sources of electrical disturbance. This product is covered by our two-year warranty. [. . . ]