User manual LEXIBOOK ST050

[. . . ] When changing the batteries, do not press any key on the remote control. The red (R), green (G), yellow(Y), and blue (B) buttons can have various functions depending on whether your TV set supports these applications. Please always try the manual set-up FIRST, then if no code in the list of brands and models matches your device, try the Quick Search, and only if this one fails, try Automatic Programming. warning: program one appliance at a time. [. . . ] Press the respective DEVICE key on your remote control. Press the SET key followed by the POWER button ( ) on your remote control. Hold down both keys until the LED remains solid. Release both keys; the LED starts blinking. 5 codes are transmitted at a time; there is a 5-second period between each transmission, approximately 9 minutes in total. When your device switches off, then the correct code range has been found. Promptly press the respective DEVICE key to auto search within these five codes. Go back to your device and switch it ON again (with original remote or using the front panel buttons). Aim the searching remote to it: when your device switches off, the correct code has been found. During step 5, the SET button can be pressed to return to step 3 Check whether all applications of your device can be operated with the remote control keys. Tips for quick and auto search modes: - Some devices cannot be powered on/off using the remote control. In such case, use the PLAY button instead of POWER to check if the device responds to the remote control. - The search direction can be changed by pressing the CH+/- button. - All the function buttons except POWER and PLAY can be verified without exiting the quick search mode. If no button was pressed for more than 30 seconds, setup stops automatically, the LED goes off. Should your remote control still not work, check the codes list again and repeat the setup procedure (manual or code search) until you find the correct code. Storing your favourite channels and child lock The FavCH key allows you to store your favourite channels or limit the number of channels accessible to your children. The following number of channels can be stored or retrieved using the FavCH button: Press and hold the SET button and the FavCH button simultaneously until the LED lights up. 1 to -digit channel numbers can be stored. Once you have stored your favourite channels, simply press the FavCH button to browse through the channels in the order they were stored and select one of them. Then, one after the other, press 9 ­ 2 ­ 0. Child Lock In Child Lock mode, only the following buttons will be operative: POWER VOL+/-, MUTE, DEVICE buttons SET and FavCH. [. . . ] Keep this instruction manual in a safe place as it contains important information. Disclaimer: In our constant concern for improvement, the colours and details of the product may differ slightly from those shown on the packaging. Your remote control stops working after the set-up is completed and successful. Some of your remote control keys are not working properly. [. . . ]