User manual LEXIBOOK ST10

[. . . ] For example, start by setting your remote to your TV, then to your DVD player. If your device cannot be programmed using manual setup or its code is not in the list, program your remote control using the quick or auto search function. The search function tests all the codes one after another and finds the right one for your device. This search should be used only if Manual search failed or if the brand or correct model code are missing. [. . . ] Press the SET key first and hold it down while pressing the respective device key on your remote control, hold both keys down. For example: To program your TV, press first SET and then TV1 simultaneously. When the LED (on upper left corner of the unit) lights up, release the keys. Use the numeric keys to enter the 3-digit code applicable for your device. Try some keys on your remote to check if they work properly. If they do, your settings were successful: you found the right code. You are now ready to set another device, with the same procedure. If your remote control's keys do not work, you did not find the right code and you need to try the next 3-digit code corresponding to your device's brand in the list: repeat steps 3 to 7, until your device responds correctly to the keys pressed on the remote. notes: - Press the respective DEVICE button if you wish to stop the manual setup. If no button is pressed for more than 15 seconds, setup ends automatically and the LED goes off. This search should be used only if Quick Search did not work. Then, one after the other, press 9 ­ 2 ­ 1. Then, one after the other, press 9 ­ 2 ­ 2. Then, one after the other, press 9 ­ 2 ­ 0. With one of the macro keys, you can operate a series of up to 15 functions by pressing one single key. In other words, you will be able to execute several control commands in the order they were stored by simply pressing the respective MACRO key. Press and hold the SET button, then press one of the MACRO keys (M1, M2, and M3). When the LED lights up, release the two buttons. Now press the buttons, the application of which you would like to activate successively in the respective order. when procedure is completed , the LED is off. For example: You wish to store the following control command sequence on M1: TV1 on ­ Switch to TV/VCR ­ VCR on ­ Play ­ Switch to TV. Then, you have to enter : SET + M1 ­ TV1 ­ POWER ­ TV/VCR ­ VCR ­ POWER ­ PLAY ­ TV1 ­ M1. [. . . ] This product is covered by our two-year guarantee. For all matters relating to the guarantee or our after-sales service, please contact your retailer and have your receipt on hand. Our guarantee covers manufacturing or assembly defects with the exception of all damage resulting from a failure to respect the instructions, or any inappropriate handling of the article (such as taking it apart, exposing it to heat or humidity, etc). Note: It is recommended that all packaging be kept for future reference. [. . . ]