User manual LEXMARK C752

[. . . ] C752 User's Reference June 2003 www. lexmark. com Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc. , registered in the United States and/or other countries. 740 West New Circle Road Lexington, Kentucky 40550 Table of contents Chapter 1: Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Edition notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Licensing notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Note: Print Directory is available only when either a nondefective flash or disk is installed and formatted, and Job Buffer Size is not set to 100%. To print a sample of all the fonts available for the selected printer language. PCL Fonts PS Fonts Prints a sample of all printer fonts available for PCL emulation. Prints a sample of all printer fonts available for PostScript emulation. Print Menus Print Net <x> Setup To print a listing of the current user default values, the installed options, the amount of installed printer memory, and the status of printer supplies. To print information relating to the internal print server and the network settings defined by the Network <x> Setup menu item in the Network Menu. 75 6 Understanding printer messages The printer operator panel displays messages describing the current state of the printer and indicates possible printer problems you must resolve. This topic provides a list of all printer messages, explains what they mean, and tells you how to clear the messages. Ready Message What this message means A tray has been inserted, and contains the type and/or size print media listed. What you can do Wait for the message to clear. <Custom Type Name> in <input source> <size> in <input source> <type><size> in <input source> <x> Alignment A color alignment procedure is in progress and the user is being prompted for a series of alignment values. The values range from A to L. · Enter the alignment value, and then press Select to continue to the next alignment value. · Press Go or Return to cancel the alignment procedure. See also: Aligning the image transfer unit Activating Menu Changes Bin <x> Full The printer is activating changes made to the printer settings. Wait for the message to clear. See also: Disabling the operator panel menus Remove the stack of paper from the bin to clear the message. If you assigned the bin a name, the bin name is displayed instead of the bin number. · Press Menu to open the Job Menu and cancel the current job. The specified bin is full. Busy The printer is busy receiving, processing, or printing data. 76 Message What this message means The printer is processing a request to cancel a fax job. The printer is processing a request to cancel the current print job. The printer is requesting that a different type of paper be loaded in one of the input sources. The specified device is either not fully connected to the printer or is experiencing a hardware failure. What you can do Wait for the message to clear. See also: Canceling a print job Change the paper type in the specified source. See also: Loading the trays; Setup Guide · Reestablish communication by removing the specified device and reattaching it to the printer. · Press Go to clear the message and continue printing. · In the case of a hardware failure, turn the printer off and back on. If the error recurs, turn the printer off, remove the specified device, and call for service. Wait for the message to clear. Canceling Fax Canceling Job Change <x> Check <device> Connection Clearing Job Accounting Stat Close Door Close Finisher Door Close Tray X Door Copying The printer is deleting all job statistics stored on the hard disk. The printer is processing a copy job originating from an OptraImageTM scanner. Close the printer front cover to clear the message. [. . . ] Value Off Single Continuous Toner Alarm Lets you choose how the printer responds when toner is low. Off Single Continuous Result The alarm does not sound, but printing stops until the interventions are cleared. * The printer stops printing, displays a message, and activates the selected alarm type. The printer displays a message and continues printing. The printer stops printing, displays a message, and activates the selected alarm type. * If multiple attendance conditions are pending, the alarm only sounds when the first message is displayed. [. . . ]