User manual LEXMARK J110

[. . . ] Edition: July 2000 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC. , PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND , EITHER EXPRESS OR IMPLIED , INCLUDING , BUT NOT LIMITED TO , THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. [. . . ] If that does not clear the message, try cleaning the copper contact area on the printhead. The printhead is not designed for your printer. Replace it with a printhead that is made for your printer. During its power on cycle, the printer does not detect the external print server. If your printer is locally attached, press Go to clear the message. if it is attached to a network , check that the cable is securely connected to your computer. If this does not clear the message, contact the network administrator. If you want to use the parallel port, select Parallel Buffer from the Parallel Menu and then select Auto. The printer does not have enough memory to process the job. press Go to continue printing the job , although some data is lost. If your printer is not responding, first make sure: The printer is turned on The power cord is plugged in Other electrical equipment plugged into the outlet works The printer cable is securely attached to the computer and the printer If all else fails, turn the printer off and back on from the on/off switch (never a power strip). If a message appears on the operator panel, click PRINTER MESSAGES to find out what it means and how to clear it. If you have a paper jam, click CLEARING PAPER JAMS to identify the jam and how to clear it. Solutions to printing problems you may encounter are listed below. Your job prints from the wrong tray or on the wrong media. You printed an envelope but the words run off the side. menu settings changed from the operator panel have no effect. Solution Check the Paper Size setting in your printer driver and your software application. check the Paper Type and Paper Source settings in your printer driver. Be sure to change orientation to landscape in your printer driver before printing an envelope. Your printer driver overrides all but the Paper Size and Paper Type settings set from the operator panel. Your printer is not ready to receive data. [. . . ] MarkVision for UNIX/Sun offers enterprise scalability, reliability, and performance that helps you easily set up, manage, and maintain printers across networks. Ultimately, this reduces help desk costs and increases network administrator productivity using: To purchase MarkVision for UNIX, contact the place where you bought your printer or visit the Lexmark Web site at www. MarkVision Messenger lets you create Actions that execute commands whenever a status event occurs across a set of devices. device status events are conditions signaled by messages like Paper Tray Missing or Ink Low. [. . . ]