User manual LEXMARK MARKNET X2000 QUICK REFERENCE

[. . . ] In other countries, contact your point of purchase. References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. [. . . ] Click What's on this CD and look for Print Server Setup Utility to find information about installing and using the utility. Check under the TCP/IP heading to verify your IP address, netmask, and gateway settings are non zero. After you have assigned and verified the TCP/IP settings, you are ready to configure the printers attached to the print server and set up your network clients to print to them. In Windows environments, your network printers can be configured for direct printing or for shared printing. Direct IP printing--when you want to print directly to a printer on your network Shared printing (point and print, and peer-to-peer)--when you need to centrally manage network printers Detailed information about using each of these printing methods is on the drivers CD. Click View Documentation and look for information about network printer installation. System drivers are built into Windows operating systems. Click View Documentation and look for information about network printer installation for your specific Windows environment. If you choose to install without using the instructions on the drivers CD, you need a basic understanding of network printing on TCP/IP networks, installing printer drivers, and the process involved in creating new network ports. Your printer connects automatically to AppleTalk networks and becomes readily visible to other network clients. X, you must create a printer object (icon) on the desktop of each network client using the LaserWriter 8 printer driver and the custom printer PPD file. For Mac OS X, select Add Printer and create a queue in the print center using the PostScript Printer Module and the custom printer PPD file. Information about creating the printer object on your AppleTalk clients is on the drivers CD that shipped with your printer. Depending upon which version of the drivers CD shipped with your printer, you may also find this software on the drivers CD. Your printer supports many UNIX and Linux platforms, such as Sun Solaris and Red Hat. The User's Guide in each package gives detailed instructions for installing and using Lexmark printers in UNIX and Linux environments. You can download these printer driver packages from Lexmark's Web site at www. Depending upon which version of the drivers CD shipped with your printer, you may also find the driver package you need on the CD. Your printer works with both Novell Distributed Print Services (NDPS) and regular queue-based NetWare environments. If you have an NDPS environment, we recommend you install the Lexmark NDPS IP Gateway. The gateway tightly integrates your printers with NDPS so you can easily monitor, control, and print to them. You can get the gateway, snap-ins, support files, and a white paper with installation instructions from Lexmark's Web site at www. [. . . ] The power supply must be connected to an electrical outlet that is near the product and easily accessible. Refer service or repairs, other than those described in the operating instructions, to a professional service person. This product is designed, tested, and approved to meet strict global safety standards with the use of specific Lexmark components. The safety features of some parts may not always be obvious. [. . . ]