User manual LEXMARK T634 Reference Guide

[. . . ] Technical Reference May 2003 www. lexmark. com Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc. , registered in the United States and/or other countries. 740 West New Circle Road Lexington, Kentucky 40550 Edition: May 2003 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC. , PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. [. . . ] Errors: stackunderflow, typecheck Note: The password is defined as a 4-byte number. currentfilenameextend currentfilenameextend boolean returns a boolean on the stack to indicate whether the extension should be automatically added to any filename. The boolean value is either: true false adds the extension does not add the extension See "Filename Extensions" on page 6-10. Error: stackoverflow currentmanualduplexmode integer currentmanualduplexmode queries the current value of the manual duplex mode. An integer is returned on the stack: 0 1 2 current job manual duplex mode is no manual duplex current job manual duplex mode is printing . rst sides of job current job manual duplex mode is printing second sides of job Error: stackoverflow 4-30 PostScript defaulttimeouts -- defaulttimeouts job manualfeed wait queries the user default settings of all timeouts. Three integers are returned on the stack: · JobTimeout system parameter 0 disabled (default) 15. . . 65535 seconds · ManualFeedTimeout page device parameter 0 disabled 1. . . 65535 seconds (default is device dependent) To find the default for your printer, see Table C-2 on page C-4. · WaitTimeout system parameter 0 disabled 15. . . 65535 seconds (default is 40 seconds) Error: stackoverflow deletefile filename deletefile deletes the specified file from the disk. Errors: invalidfileaccess, ioerror, stackunderflow, typecheck, undefinedfilename Note: An undefinedfilename error occurs if the file does not exist. 4-31 PostScript devcontrol string integer devcontrol boolean allows a host computer utility to manage resources on the flash or disk. It requires a string device name parameter, an integer command name parameter, and two command argument parameters. The device control operator performs a specified command on the specified device. The return values on the stack indicate: true false the command is successful the command is unsuccessful and returns an error code Table 4-12: devcontrol Operator Parameters Integer Command Name Parameter 1 5 8 9 10 11 12 13 14 15 16 17 18 19 19 20 20 21 22 23 24 27 Argument Parameter null null file null filename description password null password null filename password filename password password null password null filename password filename password null null null null devicename password filename password devicename null filename null null null null null null null null null file null Description Park disk heads Make contiguous flash file Set description of file Set device read/write password Set device write password Set file read/write password Set file write password Declare device read/write password Declare device write password Declare file read/write password Declare file write password Reset device password list Reset file password list Get device password Get file password Determine if device password is properly declared Determine if file password is properly declared Scan for bad block Abort bad block scan Quick bad block scan Flush the disk cache Be quiet when writing to disk 4-32 PostScript Table 4-13: Unsuccessful devcontrol Parameter Error Codes Code 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 Meaning File system access has not been initialized Could not allocate file descriptor Some invalid argument was passed No such device Invalid access to file requested Argument too large (filename, buffer) Invalid file descriptor or filename Catch all error or device error Unable to allocate memory for buffer, data structure Device busy Device not currently mounted Attempt to perform illegal IO operation No space to update or create file Major change in file system for findnext() to function properly Corrupted file system on device Device already mounted Could not initialize file system Device not mounted No file entry located Bad file system on device Password required Aborted by callback Errors: invalidaccess, rangecheck, typecheck devdismount device devdismount -- dismounts the specified device by setting the Mounted device parameter for the specified device to false. Errors: invalidaccess, stackunderflow, undefinedfilename Note: An undefinedfilename error occurs when an invalid device name is used. 4-33 PostScript devforall proc scratchstring devforall -- executes the specified proc procedure for each storage device after pushing a substring on the stack that is the portion of the scratch string containing the device name. Errors: invalidaccess, rangecheck, stackoverflow, stackunderflow, typecheck, undefined devformat devicename pages action devformat -- formats (erases all data from) the specified device. This operator is in systemdict. pages Sets the LogicalSize device parameter for the specified device: 0 entire device is formatted 1, 2, 3 an ioerror occurs action 1 is added to the action argument. The result is used for the InitializeAction device parameter for the same device. A devformat on a flash device formats the entire device regardless of the LogicalSize specified. Errors: invalidaccess, ioerror, limitcheck, rangecheck, stackunderflow, typecheck, undefined, undefinedfilename Note: An invalidaccess error occurs if devformat is not executed through exitserver or startjob. 4-34 PostScript devmount device devmount boolean sets the Mounted device parameter for the specified device to true. It also returns the value of the Mounted device parameter for the specified device. The boolean values indicate: true false device successfully mounted, or was already mounted device not mounted If a device with the specified device name is not installed, an undefinedfilename error occurs. This operator may change the search order. See "Device Search Order" on page 6-12. Errors: invalidaccess, stackunderflow, undefinedfilename devstatus devicename devstatus false or devicename devstatus searchable writeable hasnames mounted removable searchorder free size true returns on the stack the status of a specified device. A value of false is returned if the device is not present. [. . . ] Operator Name dostartpage dosysstart duplexer duplexmode enginesync file filenameforall fileposition firstside fontnonzerowinding hardwareiomode idlefonts ignoresize initializedisk jobname jobsource jobtimeout manualfeed manualfeedtimeout newsheet pagecount pagesprinted papertray printername product PS2fonts PS3fonts quiet ramsize realformat renamefile Page 4-38 4-38 4-38 4-39 4-39 4-40 4-40 4-40 4-41 4-41 4-41 4-41 4-18 4-42 4-42 4-43 4-44 4-22 4-45 4-45 4-45 4-46 4-22 4-46 4-46 4-47 4-47 4-47 4-48 4-48 4-48 Printer Model E321, E323 T630, T632, T634 C912 C-3 PostScript Support Table C-1: Supplemental Operators (Continued) Supported Not Supported Page numbers reference operator descriptions. Operator Name resolution revision sccbatch sccinteractive setcoverpage setdefaulttimeouts setdoidlefonts setdojamrecovery setdoprinterrors setdoret setdostartpage setdosysstart setduplexmode setenginesync setethernetaddress setfilenameextend setfileposition sethardwareiomode setidlefonts setignoresize setjobtimeout setmanualduplexmode setpapertray setprintername setquiet setresolution setsccbatch setsccinteractive setsoftwareiomode settumble setuniversalsize Page 4-49 4-49 4-50 4-51 4-51 4-51 4-52 4-52 4-52 4-53 4-53 4-54 4-54 4-55 4-55 4-55 4-56 4-56 4-56 4-18 4-57 4-57 4-23 4-58 4-58 4-59 4-59 4-60 4-60 4-60 4-19 Printer Model E321, E323 T630, T632, T634 C912 C-4 PostScript Support Table C-1: Supplemental Operators (Continued) Supported Not Supported Page numbers reference operator descriptions. Operator Name setuserdiskpercent softwareiomode tumble userdiskpercent waittimeout Page 4-61 4-61 4-61 4-62 4-62 Printer Model E321, E323 E321, E323 false false Table C-2: Page Device Parameters Supported Not Supported Page numbers reference parameter descriptions. Key BeginPage Collate DeferredMediaSelection DeviceRenderingInfo · Screening ­ ColorGrade ­ PictureGrade ­ IET ­ IETImagesOnly ­ IETPictureGrade ­ None · TonerSaver · PictureGrade · ImageEnhancement · PrintDarkness · AutoMediaType · EdgeToEdge · DefaultPoliciesPageSize · SubstituteSize Page 4-63 4-63 4-63 4-63 4-63 4-63 4-63 4-63 4-63 4-63 4-63 4-64 4-64 4-64 4-64 4-65 4-65 4-65 4-65 false false Printer Model false PictureGrade false true T630, T632, T634 false false C912 T630, T632, T634 false C912 true C-5 PostScript Support Table C-2: Page Device Parameters (Continued) Supported Not Supported Page numbers reference parameter descriptions. [. . . ]