User manual LEXMARK X2550

[. . . ] 2500 Series All-In-One User's Guide December 2006 www. lexmark. com Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc. , registered in the United States and/or other countries. All other trademarks are the property of their respective owners. 740 West New Circle Road Lexington, Kentucky 40550 Important safety information Use only the power supply and power supply cord provided with this product or the manufacturer's authorized replacement power supply and power supply cord. Connect the power supply cord to an electrical outlet that is near the product and easily accessible. [. . . ] 3 To remove the image patterns caused by scanning from magazines or newspapers, click Remove Patterns. 4 From the drop-down list, select the patterns to be removed. 5 To reduce stray marks on color photos, click the check box, and then move the slider to the desired value. The thumbnail is updated. Scanning 44 Customizing scan settings using the computer 1 From the desktop, double-click the Lexmark Imaging Studio icon. 4 Change the settings as needed. Setting Color Depth Scan Resolution (Dots Per Inch) Size Options Select either Color, Grey, or Black and White. Select a scan resolution value from the drop-down list. · You can auto-crop the scanned item. Move the slider to the desired setting. · You can select the area to be scanned. Select a paper source from the drop-down list. Select area to be scanned You can select the area to be scanned by choosing a paper size from the drop-down list. Convert the image to text with OCR Select this to convert your image to text. Always use these settings when scanning You can make your selections permanent by selecting the check box. Changing the order of programs in the Scan Application list 1 From the desktop, double-click the Lexmark Imaging Studio icon. 3 From the program taskbar at the bottom of the screen, click Other Software. 5 Select a program from the list box, and then click the program further down in the list. to move the program higher in the list, or click to move 6 Click Close to save any changes. Scanning 45 Faxing Make sure: · The printer is connected to a computer that is equipped with a modem. · The computer is connected to a working phone line. · Both the printer and the computer are turned on. Sending a fax using the software You can scan a document to the computer and then fax it to someone using the software. 1 Load an original document facedown on the scanner glass. 2 From the desktop, double-click the Lexmark Imaging Studio icon. 3 From the left pane of the Welcome screen, click Fax. 6 Enter the recipient information, and then click Next. Note: A fax number can include up to 64 numbers, commas, periods, and/or these symbols: * # + - ( ). 7 Enter the cover page information, and then click Next. 8 If there are any additional documents that you want to send with your fax, add these now, and then click Next. 9 To send your fax: · Immediately--Select the Send now option. · At a scheduled time: a Select the "Delay sending until" option. 10 If you want a paper copy of your fax, select Print a copy of your fax. [. . . ] This equipment shall not be set up to make automatic calls to the Telecom's 111 Emergency Service. This equipment may not provide for the effective hand-over of a call to another device connected to the same line. This equipment should not be used under any circumstances that may constitute a nuisance to other Telecom customers. Some parameters required for compliance with Telecom's telepermit requirements are dependent on the equipment associated with this device. [. . . ]