User manual LEXMARK X342N

[. . . ] X340, X340n, X342n MFP User's Guide January 2006 www. lexmark. com Edition: January 2006 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC. , PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. [. . . ] 2 Load the original document face-up into the ADF or face-down on the scanner glass. 3 From the control panel, make sure Copy mode is selected. 5 Press 6 Press or or repeatedly until Paper Saver is selected, and then press repeatedly until the setting you want to use is selected. . Note: · · · 2-Up--Prints two copied documents on a page. 4-Up--Prints four copied documents on a page. Off--Prints one copied document on a page. 7 Press . Collating copies 52 8 Press Start. 9 If prompted, press 1 (for yes) if you have more pages, or 2 (for no) if you have finished copying the number of pages you want to print in Paper Saver mode. Enlarging or reducing an image 1 Load paper. 2 Load an original document face-up into the ADF or face-down on the scanner glass. Note: Do not load postcards, index cards, small items, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass. 3 From the control panel, make sure Copy mode is selected. 4 Press Scale repeatedly until the option you want appears. Note: Choose Custom to enter a specific percentage to enlarge or reduce. 5 Press . 6 Press Start. Enlarging or reducing an image 53 8 Scanning Using the X340, X340n, or X342n, you can send scanned images through the USB connection to your computer. In addition, using the X342n you can scan the document back to your computer over the network. You can load an original document into the ADF or on the scanner glass. ADF Scanner glass Use the ADF for multiple­page documents. Note: Do not load postcards, 4 x 6 cards, small items, or thin media (such as magazine clippings or carbonless paper) into the ADF. Place these items on the scanner glass. Use the scanner glass for single-page documents, postcards, 4 x 6 cards, small items, or thin media (such as magazine clippings or carbonless paper). Scanning 54 Scanning documents using the control panel (USB attach only) 1 Make sure: · · · The computer is on. The software has been loaded onto the computer. 2 Load an original document face-up into the ADF or face-down on the scanner glass. Note: Do not load postcards, index cards, small items, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass. 3 From the control panel, press Scan. 4 Press or repeatedly until the application you want to use appears. Note: · If you do not see the application you want to use, configure additional applications for scanning. For more information, see Configuring additional applications for scanning on page 56. Adjust the scan settings using the computer. For more information, see Customizing scan settings on page 58. · 5 Press Start. The MFP scans the document. 6 If prompted, press 1 (for yes) if you have more pages, or 2 (for no) if you have finished scanning the entire document. Scanning documents using the computer (USB attach only) 1 Make sure: · · · The computer is on. The software has been loaded onto the computer. 2 Load an original document face-up into the ADF or face-down on the scanner glass. 3 Open QLINK: · Double-click the QLINK icon on the desktop. Scanning documents using the control panel (USB attach only) 55 · Click Start All Programs Lexmark Lexmark X34x Series QLINK. 4 Select the application you want to use. Note: If you do not see the application you want to use, configure additional applications for scanning. [. . . ] Normally, metering pulses are not provided unless specifically requested by the subscriber at the time of installation. Using this product in Switzerland This product requires a Swiss billing tone filter (Lexmark part number 80D1877) to be installed on any line which receives metering pulses in Switzerland. The Lexmark filter must be used, as metering pulses are present on all analog telephone lines in Switzerland. German GS mark notice Model: Lexmark X34x Series Machine type: 7003-xxx Mailing address Lexmark Deutschland GmbH Postfach 1560 63115 Dietzenbach Physical address Lexmark Deutschland GmbH Max-Planck-Straße 12 63128 Dietzenbach Phone: 0180 - 564 56 44 (Product Information) Phone: 01805 - 00 01 15 (Technical Support) E-mail: internet@lexmark. de Notices 99 Notices Noise emission levels The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296. 1­meter average sound pressure, dBA Printing Scanning Copying Idling 52 48 52 30 Printer energy consumption The following table documents the power consumption characteristics of the printer. Mode Printing Ready Power Saver Off Description Printer is generating hard copy output Printer is waiting for a print job Printer is in energy saving mode Printer is plugged into a wall outlet, but switch is turned off Power consumption 420 W 70 W 13 W 0W The power consumption levels listed in the previous table represent time­averaged measurements. [. . . ]