User manual LEXMARK Z55

[. . . ] Edition: December 2001 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC. , PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND , EITHER EXPRESS OR IMPLIED , INCLUDING , BUT NOT LIMITED TO , THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. [. . . ] 2 Squeeze and slide the paper guide to the left edge of the cards. 3 Open your digital photo in your photo application. 4 When you are ready to print your photo, click File 7 From Step 2 on the screen, select a paper size, and then click OK. To learn how to print special projects, follow the steps for your operating system. Is the power supply firmly attached to your printer and an electrical outlet?Is your printer cable securely attached at both ends?Are you using either a USB cable (recommended) or a parallel cable (Windows 95, 98, Me, and NT 4. If you are using a parallel cable, make sure it is an IEEE 1284-compliant parallel cable that supports bidirectional printing. Did you remove the sticker and transparent tape from the back and bottom of both print cartridges?Make sure you do not push the paper too far into the printer. If Lexmark Z55 does not appear in your list of programs, install the printer software (see page 24). If Lexmark Z55 Control Panel does not appear in your list of Control Panels, install the printer software (see page 25). Are you experiencing slow printing while using a parallel cable?3 Connect your printer to your computer with a USB cable. 4 Reinstall the printer software following the steps on page 21. Is your printer connected to your computer through an external device, such as a USB hub, switch box, scanner, or fax machine?1 Disconnect your printer from any external devices. 2 Connect your printer directly to your computer with a USB If the test page prints, the problem may be with your external devices, not your printer. Check the documentation that came with your external devices for help. If the test page does not print, refer to the printer software Help (see page 4) for further troubleshooting information. If your printer is connected to a network with a Lexmark adapter, refer to the adapter documentation for additional troubleshooting information. Refer to the Lexmark Solution Center (see page 3) or the Online User's Guide (see page 3) for help solving problems you may have after setting up your printer, such as: Slow print speed or poor print quality · Use this chapter to solve problems you may have while setting up your printer. [. . . ] When warranty service involves the exchange of a product or part, the item replaced becomes the property of the Remarketer or Lexmark. The replacement may be a new or repaired item. the replacement item assumes the remaining warranty period of the original product. Replacement is not available to you if the product you present for exchange is defaced, altered, in need of a repair not included in warranty service, damaged beyond repair, or if the product is not free of all legal obligations, restrictions, liens, and encumbrances. [. . . ]