User manual LG 21FU1RL

[. . . ] Color Television OWNER'S MANUAL Please read this manual carefully before operating your set. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service. Internet Home Page : http://www. lge. com P/N : MFL53455512 - EN (CW81A/B) Safety Precautions WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK). [. . . ] Press the G and then use the D / E button to select Auto prog. . Press the G button to enter the Auto prog. The AUTO PROGRAM starts now. Selecting the on screen language 1. Press the MENU button and then use the D / E button to select the Special menu. Press the G and then use the D / E button to select Language. Press the G and then use the D / E button to select the desired language. From this point on, the on-screen display will be presented in the language of your choice. Repeatedly press the MENU button to exit. Memorizing the Channels by MANUAL PROGRAM Using the MEMORY/ERASE button You can conveniently perform MANUAL PROGRAM using the MEMORY / ERASE button on the remote control. Press the D / E or NUMBER buttons to select the channel number you want to memorize or erase. Press the MEMORY/ERASE button to select Memory or Erase. Memorizing Channels This is the function to memorize all the active channels in your area before you can use the TV. There are two ways of memorizing channels. You can use either. One is called AUTO PROGRAM and the other is called MANUAL PROGRAM. In AUTO PROGRAM the TV will memorize the channels in ascending order. If there are additional channels you want to add or delete, you can manually add or delete those channels. Selecting the Channel Press the D / E button to conveniently select the upper or lower channel then the channel being viewed, or NUMBER buttons to directly select the desired channel. Memorizing the Channels by AUTO PROGRAM AUTO PROGRAM searches and memorizes all the active channels in your area then you can select the desired channel with the D / E buttons. Adjusting the Volume Press the G button to increase the volume level or F button to decrease the volume level. To mute the sound, Press the MUTE button. It's convenient when you get the telephone calls. To restore the muted sound, press the MUTE button again or VOL F / G button. Using the AUTO PRG. /A. PROG button You can conveniently perform AUTO PROGRAM using the AUTO PRG. /A. PROG button on the remote control. 5 Various function Setting the Clock Before setting the on/off timer, first you should set the current time. Key Lock The TV can be set so that the remote control is needed to control it. This feature can be used to prevent unauthorized viewing. Notes: ·With the key lock on, the display Key Lock appears on the screen if any button on the front panel is pressed while viewing the TV. Press the G and then D / E button to select Auto Off If there is no input signal, the TV is switched to standby mode automatically in 10 minutes. Press the MENU button and then use the D / E button to select the Timer menu. Press the G and then use the D / E button to select Auto off. [. . . ] Press the TV/VIDEO button to select VIDEO1 or VIDEO. Note: In some stereo models, if you connect the audio/video output jacks of the VCR to the IN 2 (A/V) jacks on the front or side of TV, select VIDEO2. Note: In case of MONO VCR, connect the output jack of VCR to the AUDIO L/MONO IN jack of TV so that the sound can be heard from both speakers. If you connect it to the AUDIO R IN jack of TV the sound is heard only from right speaker. Monitor Out Note: If you connect VIDEO IN jack to the TV that is displayed COMPONENT mode, the second TV or the monitor displays AV IN mode. Connecting AUDIO/VIDEO IN Jacks 8 Note: In some mono models, when the input jacks on the front panel and back panel are connected to external equipments at the same time, the input jacks on the front panel have priority over the input jacks on the back panel of the TV. recording VCR to the OUT (A/V) jacks on the back. Set the recording VCR to record. Connecting the S-VHS VCR (some models) 1. [. . . ]