User manual LG 22LX320C

[. . . ] OWNER’S MANUAL * LED TV LY31** LY33** LY34** LY54** *LG LED TVs are LCD TVs with LED backlighting. Please read this manual carefully before operating your set and retain it for future reference. Com 2 TABLE OF CONTENTS TABLE OF CONTENTS ENGLISH ENG 3 3 LICENSES OPEN SOURCE SOFTWARE NOTICE ASSEMBLING AND PREPARING Unpacking Separate Purchase Parts and Button - Using the Joystick button Lifting and Moving the TV Setting up the TV - Attaching the stand Mounting on a table Mounting on a wall How to use Dual Lock™ 47 56 57 57 57 58 59 59 60 SPECIFICATIONS IR CODES EXTERNAL CONTROL DEVICE SETUP RS-232C Setup Type of Connector: D-Sub 9-Pin Male RS-232C Configurations Communication Parameters Command Reference List Transmission / Receiving Protocol 4 4 7 8 9 10 11 11 14 17 19 21 MAKING CONNECTIONS 22 Antenna Connection 22 Satellite Dish Connection 23  Adapter Connection 23 Euro Scart Connection 24 Network Setup 24 - Wired network connection 24 - Network setting 26 Other Connections WARNING yy If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death. 40 45 45 45 45 REMOTE CONTROL MAINTENANCE Cleaning your TV - Screen, frame, cabinet and stand - Power cord CAUTION yy If you ignore the caution message, you may be slightly injured or the product may be damaged. [. . . ] connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device. available external devices are: HD receivers , DVD players , VCRs , audio systems , USB storage devices , PC , gaming devices , and other external devices. NOTE yy The external device connection may differ from the model. Yy Connect external devices to the TV regardless of the order of the TV port. Yy If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information on recording, refer to the manual provided with the connected device. Yy Refer to the external equipment’s manual for operating instructions. Yy If you connect a gaming device to the TV, use the cable supplied with the gaming device. Yy In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear. Yy In PC mode, some resolution settings may not work properly depending on the graphics card. yy Only a USB storage device is recognizable. ENGLISH ENG 22 MAKING CONNECTIONS Antenna Connection Connect the TV to a wall antenna socket with an RF cable (75 Ω). Satellite Dish Connection (Only satellite models) Connect the TV to a satellite dish to a satellite socket with a satellite RF cable (75 Ω). Yy If the image quality is poor with an antenna connected, try to realign the antenna in the correct direction. yy An antenna cable and converter are not supplied. Yy Supported DTV Audio: MPEG, Dolby Digital, Dolby Digital Plus, HE-AAC (*Not Provided) MAKING CONNECTIONS 23 A  dapter Connection (Only 28LY31**, 22/28LY33**, 22/28LY34**, 22/28LY54**) (Depending on model) Power Cord Euro Scart Connection Transmits the video and audio signals from an external device to the TV set. Connect the external device and the TV set with the euro scart cable as shown. ENGLISH ENG (19V DC-IN ) AV (RGB) AC-DC Adapter CAUTION yy Please be sure to connect the TV to the AC-DC power adapter before connecting the TV’s power plug to a wall power outlet. 24 MAKING CONNECTIONS Network Setup Wired network connection This TV can be connected to a Pro:Centric server via the LAN port. After making the physical connection, the TV needs to be set up for network communication. [. . . ] Transmission [k][a][ ][Set ID][ ][FF][Cr] Ack [a][ ][Set ID][ ][OK/NG][Data][x] * Similarly, if other functions transmit ‘0xFF’ data based on this format, Acknowledgement data feed back presents status about each function. And other message may display on the screen when TV is power On. You can also adjust mute using the MUTE button on remote control. (Main picture format) You can also adjust the screen format using the Aspect Ratio in the Q. [. . . ]