Detailed instructions for use are in the User's Guide.
[. . . ] ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that has passed rigorous testing to verify that it plays DivX video. Visit divx. com for more information and software tools to convert your files into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. [. . . ] If yy the image quality is poor with an antenna connected, try to realign the antenna in the correct direction. Supported DTV Audio: MPEG, Dolby Digital, yy Dolby Digital Plus, HE-AAC.
Satellite dish Connection
(Only satellite models)
13/18 V 700mA Max LNB IN
(*Not Provided) Connect the TV to a satellite dish to a satellite socket with a satellite RF cable (75 Ω).
20 MAKING CONNECTIONS
Euro Scart Connection
Transmits the video and audio signals from an external device to the TV set. Connect the external device and the TV set with the euro scart cable as shown. Output Type AV1 (TV Out1) Digital TV
Current input mode Digital TV
Analogue TV, AV Component HDMI RGB 1 TV Out : Outputs Analogue TV or Digital TV signals. Analogue TV
Any Euro scart cable used must be signal yy shielded.
MAKING CONNECTIONS 21
Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable as shown. DVD / Blu-Ray / PC / HD Cable Box / HD STB
(Only satellite models)
HDMI IN LAN COMPONENT IN ANTENNA / CABLE IN AV2 IN RGB IN (PC)
13/18 V 700mA Max LNB IN
(Only LAN PORT model)
COMPONENT IN COMPONENT IN
DVD / Blu-Ray / HD Cable Box
WHITE YELLOW WHITE
VCR / DVD / Blu-Ray / HD Cable Box
22 MAKING CONNECTIONS
RGB IN (PC)
PCMCIA CARD SLOT
AUDIO IN (PC)
DVD / Blu-Ray / PC / HD Cable Box / HD STB
RGB OUT AUDIO OUT
(Depending on model)
1 USB port supports 0. 5A electric current. If you need more electric current in case of HDD, use the separate power adaptor.
AUDIO IN (RGB/DVI)
AUDIO IN (PC)
USB / HDD1
MAKING CONNECTIONS 23
Connecting to a PC
Your TV supports the Plug & Play* feature and has the built-in speakers with Virtual Surround that reproduces sound clearly with a rich bass. * Plug & Play: The function when a PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention.
NOTE If yy you want to use HDMI-PC mode, you must set the Input Label to PC mode. The OSD (On Screen Display) is displayed on the screen as shown below. »» When switching to HDMI input.
Is the input connected to your PC?
Do not show message again
If yy you select “Yes” the size and image quality are optimised for your PC. yy Skin Colour : Sets Skin colour spectrum separately to implement the skin colour as defined by the user. yy Grass Colour : Natural colour spectrum (meadows, hills, etc. ) can be separately set. yy Gamma : Sets the gradation curve according to the output of picture signal in relation to the input signal. yy Edge Enhancer : Shows clearer and distinctive yet natural edges of the video. yy Expert Pattern : [Depending on model] Patterns used for expert adjustment. yy Colour Filter : Filters a specific colour spectrum in RGB colours to fine-tune colour saturation and hue accurately. yy Colour Temperature : Adjusts the overall tone of the screen as desired. yy Colour Management System : This is a system that experts use when they adjust colour with a test pattern. They can select from six colour areas (Red / Green / Blue / Cyan / Magenta / Yellow) without affecting other colours. For normal images, adjustments may not result in noticeable colour changes. yy Depending on input signal or other picture settings, the range of detailed items for adjustment may differ.
To adjust picture with Picture Wizard
SETTINGS PICTURE Picture Wizard III [Depending on model] Calibrates and adjusts for optimum picture quality using the remote control and the Picture Wizard without expensive pattern devices or help from a specialist.
To select Picture Mode
SETTINGS PICTURE Picture Mode Select the picture mode optimized for the viewing environment or the programme. [. . . ] Remove the USB storage device and then re-connect it.
Supported Video Formats
yy Maximum: 1920 x 1080 @ 30p (only Motion JPEG 640 x 480 @ 30p) yy . asf, . wmv [Video] MPEG-2, MPEG-4 Part2, DivX3. 11, DivX4, DivX5, DivX6, XViD, H. 264/AVC, VC1(WMV3, WVC1), MP43 [Audio] WMA Standard, WMA9(Pro), MP3, AAC, AC3, MP3, 3D WMV Single Stream. yy divx, . avi [Video] MPEG-2, MPEG-4 Part2, DivX3. 11, DivX4, DivX5, DivX6, XViD, H. 264/AVC [Audio] HE-AAC, LPCM, ADPCM, MPEG- 1 Layer I, MPEG-1 Layer II, Dolby Digital, MPEG-1 Layer III (MP3), *DTS yy . ts, . trp, . tp, . mts, . m2ts [Video] H. 264/AVC, MPEG-2, AVS, VC1 [Audio] MPEG-1 Layer I, MPEG-1 Layer II, MPEG1 Layer III (MP3), Dolby Digital, Dolby Digital Plus, AAC, HE-AAC, *DTS yy . vob [Video] MPEG-1, MPEG-2 [Audio] Dolby Digital, MPEG-1 Layer I, MPEG- 1 Layer II, DVD-LPCM yy mp4, . m4v, . mov [Video] MPEG-2, MPEG-4 Part2, DivX3. 11, DivX4, DivX5, DivX6, XVID, H. 264/AVC [Audio] AAC, MPEG-1 Layer III (MP3), *DTS yy . mkv [Video] MPEG-2, MPEG-4 Part2, DivX3. 11, DivX4, DivX5, DivX6, XVID, H. 264/AVC [Audio] HE-AAC, Dolby Digital, MPEG-1 Layer III (MP3), *DTS, LPCM yy motion JPEG [Video] MJPEG [Audio] LPCM, ADPCM yy . mpg, . mpeg, . mpe [Video] MPEG-1, MPEG-2 [Audio] MPEG-1 Layer I, MPEG-1 Layer II, Dolby Digital, LPCM yy dat [Video] MPEG-1, MPEG-2 [Audio] MP2 yy flv [Video] Sorenson H. 263, H. 264/AVC [Audio] MP3, AAC, HE-AAC yy *rm, *rmvb [Video] RV30, RV40 [Audio] Dolby Digital, AAC, HE-AAC, RA6(Cook) yy 3gp, 3gp2 [Video] H. 264/AVC, MPEG-4 Part2 [Audio] AAC, AMR(NB/WB) yy *DTS / *rm / *rmvb : Depending on model
Using a USB storage device - warning
yy If the USB storage device has a built-in auto recognition program or uses its own driver, it may not work. yy Use only USB storage devices formatted with the Windows FAT32 or NTFS File System. yy For external USB HDDs, it is recommended that you use devices with a rated voltage of less than 5 V and a rated current of less than 500 mA. [. . . ]