User manual LG 27EA63V

[. . . ] 4 ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING ENGLISH ENG Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. 0 Cable or Power Cord AC-DC Adapter ( Depending on the country ) AC-DC Adapter ( Depending on the country ) Cable Tie CAUTION Do yy not use any unapproved accessories to ensure the safety and product life span. [. . . ] mENU > NEXT MENU > PICTURE SHARPNESS BLACK LEVEL OVER SCAN HIGH OFF 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. eXIT Each option is explained below. MENU BRIGHTNESS CONTRAST WIDE/ORIGINAL O O Analog HDMI O O O O Description To adjust the brightness, contrast of the screen WIDE Switch to full screen mode according to input image signal. oRIGINAL Change the input image signal ratio to original. * This function works only if input resolution is lower than Monitor set ratio (16:9). Analog HDMI O x x O O O To set offset level To improve the clarity and stability of the screen Description To adjust the clearness of the screen . MENU > NEXT MENU PICTURE SHARPNESS BLACK LEVEL OVER SCAN COLOR GAMMA COLOR TEMP SIX COLOR COLOR RESET DISPLAY HORIZONTAL VERTICAL CLOCK PHASE VOLUME OTHERS LANGUAGE POWER INDICATOR RESPONSE TIME O O To customize the color of the screen O O x O O x x O O O To adjust the position of the screen To improve the clarity and stability of the screen To adjust the volume To customize the screen status for a user's operating environment Sets the response time for the picture. Yy 14 CUSTOMIZING SETTINGS PICTURE ENGLISH ENG 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more 3 Select PICTURE by pressing the ► button. 4 Enter to PICTURE by pressing the ▼ button. 16 CUSTOMIZING SETTINGS DISPLAY ENGLISH ENG 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. MENU > NEXT MENU > DISPLAY HORIZONTAL VERTICAL CLOCK PHASE 2 Select the "NEXT MENU" button to enter the more 3 Select DISPLAY by pressing the ► button. 4 Open DISPLAY by pressing the ▼ button. 5 Set the options by pressing the ◄ or ► or ▼ buttons. eXIT 6 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. MENU > NEXT MENU > DISPLAY HORIZONTAL VERTICAL CLOCK PHASE To move the screen left and right. To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. Description VOLUME 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. [. . . ] It is not an error nor is it related to the monitor's performance. do you see an "Unrecognized monitor , Plug&Play (VESA DDC) monitor found" message?Yy Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www. [. . . ]