Detailed instructions for use are in the User's Guide.
[. . . ] Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. [. . . ] It is possible that certain devices may not support or be compliant with the AOA2. 0 USB audio standard, resulting in the device freezing or rebooting after being connected and detached from the speaker system. If you experience this problem, please contact your device manufacturer. Your device may need to be updated with the latest Jellybean software and or the correct AOA2. 0 USB audio standard. *About AOA (Android Open Accessory) 2. 0 version ; Audio output from Android device to the Accessory and HID (Human Interface Device) yy You are recommended to remove the case for your Android device before you connect your Android device into the dock. 1. Check the orientation of the micro USB connector on your Android phone.
Note , ,
3. Press PFUNCTION or F to select (ANDROID) function. .
During playback, Press
During playback, press Y/ U to go to the next file or to return to the beginning of the current file. Playing after 3 seconds, press Y to go to the beginning of the file.
Note , ,
yy If the connection has an error, check these problems as follows; -- Your Android device is not connected firmly. yy When you disconnect your Android device from the dock during playback, the playback may continue. yy In case of no sound from this unit, adjust the volume of your Android device. yy Depending on the position and orientation of the micro USB connector on your Android device, connect it in portrait or landscape position. yy You may not control your Android device from this unit due to malfunction of Android device. yy After searching for this unit on your Bluetooth device, connect the Bluetooth device to this unit. yy The sound may be interrupted when the connection interfered by the other electronic wave. yy Pairing is limited one Bluetooth device per one unit and multi-pairing is not supported. yy Although the distance between your Bluetooth and the set is less than 10 m, there are obstacles between both, your Bluetooth device cannot be connected. yy Depending on the type of the device, you may not be able to use the Bluetooth function. yy The electrical malfunction due to devices using same frequency such as Medical equipment, Microwaves or wireless LAN devices, the connection will be disconnected. yy When someone stands and interrupts communication between Bluetooth device and the player, the connection will be disconnected.
Note , ,
yy If the gotten away of the distance between Bluetooth and the unit, the sound quality is lower and lower. The connection will disconnect when the space between the Bluetooth and the unit gets out of the operating range of Bluetooth. yy The device with Bluetooth® wireless technology is disconnected, if you turn off the main unit or put the device away from the main unit more than 10 m. yy If the Bluetooth device is disconnected, you should connect the Bluetooth device to your unit.
Note , ,
Using Bluetooth App
About “LG Bluetooth Remote” App
“LG Bluetooth Remote” app brings a suite of new features to this unit. To enjoy more features, you are recommended to download and install free “LG Bluetooth Remote” app.
Install “LG Bluetooth Remote App” by using QR code
1. Install “LG Bluetooth Remote” app through QR code. [. . . ] yy Depending on the Bluetooth device, BT app may work restrictively not work. yy The connection you’ve made may be disconnected if you select other application or change the setting of the connected device via BT app. In such case, please check the connection status.
Bluetooth pairing does not work well.
About LED condition
Function iPod Condition
iPod Connected No iPod Android Connected Blinks Slowly
Android Loading No Android
Blinks Quickly Blinks Slowly
USB No USB Bluetooth Paired Bluetooth Ready Portable In LG Sound Sync Connected LG Sound Sync Ready BASS (BASS BLAST) BYPASS Blinks Slowly Blinks Slowly Blinks Slowly
Bluetooth Portable LG Sound Sync BASS
Trademarks and Licenses
Handling the Unit
When Shipping the Unit
Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory.
“Made for iPod, ” “Made for iPhone, ” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. [. . . ]